Cobra F-Max Irons Specifications

Full factory loft, lie and length chart for the Cobra F-Max irons, 2017–2018.

Years produced
2017–2018
Category
Super Game Improvement Irons
Construction
investment cast cavity back with a deep undercut and progressive head construction
Material
17-4 stainless steel long irons (4-7), 431 stainless steel short irons (8-SW), nickel chrome plated
Set makeup
4–SW

Loft, lie & length chart

Standard men's steel-shaft specifications for the Cobra F-Max irons.
ClubLoft (°)Lie (°)Length (in)Offset (in)Swing wt
4226139.250.248C9
52561.538.50.232C9
6286237.750.213C9
731.562.537.250.185C9
835.56336.750.154C9
94063.536.250.134C9
PW4564360.11D0
GW506435.750.039D0
SW556435.50.031D0

Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.

About the Cobra F-Max

The F-Max was the first model in Cobra's F-Max family of lightweight super-game-improvement irons for golfers with moderate swing speeds, introduced in 2017. The cast cavity backs use a progressive construction — thinner 17-4 stainless steel in the 4 through 7 irons for speed, softer 431 stainless in the 8-iron through sand wedge for feel — under a nickel chrome plating, with weight positioned back and heelward for straighter, draw-biased flight. Lofts are weak by design at 31.5 degrees for the 7-iron and 45 degrees for the pitching wedge, offset tapers from 6.3 mm at the 4-iron to 0.8 mm at the sand wedge, and the steel build swings very light at C9 through the irons. The stock men's steel set was seven clubs, 5-PW plus gap wedge. The F-Max Superlite, announced on 12 September 2018, replaced it.

Stock shafts

Related models

Frequently asked questions

What is the loft of a Cobra F-Max 7-iron?

The Cobra F-Max 7-iron has a loft of 31.5 degrees, a lie of 62.5 degrees and a steel-shaft length of 37.25 inches.

When were the original Cobra F-Max irons released?

In 2017. Cobra replaced them with the F-Max Superlite, announced on 12 September 2018, and the F-Max Airspeed followed in 2019.

Who were the Cobra F-Max irons designed for?

Golfers with moderate swing speeds. They combine weak lofts, generous offset, back-and-heel weighting for a draw and a very light build — around C9 swing weight with the stock 100-110 gram steel shaft.

How is the F-Max head construction progressive?

The 4 through 7 irons are cast from thinner, stronger 17-4 stainless steel for ball speed, while the 8-iron through sand wedge use softer 431 stainless steel for feel, all under a nickel chrome plating.

Finding a used set

The Cobra F-Max ran from 2017 to 2018 and is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.

Data compiled from:
  • Cobra Golf official 'F-MAX Irons' product page (cobragolf.com/f-max-irons), archived 15 September 2017 via web.archive.org — retrieved directly; supplies the full steel specification table (club, loft, lie, length, offset in mm, swing weight, stock flex, RH/LH) for the 4-iron through sand wedge, the seven-club 5-PW plus GW stock steel set, the F-MAX Steel / True Temper SuperLight 100-110g shaft, the Lamkin REL Midsize grip, and the progressive 17-4/431 stainless construction with nickel chrome plating. Offsets are published in millimetres (6.3 down to 0.8) and converted to inches here. The archived page is the steel-shaft listing; a graphite build was sold separately.
  • year_discontinued and successor: PUMA/Cobra press release 'COBRA Golf's new F-MAX Superlite Irons offer Moderate Swing' dated 12 September 2018, with retail from 5 October 2018 — the Superlite is described as building off the original F-MAX irons 'which debuted in 2017', the basis for both years used here.

Last reviewed 2026-07-28. Spot an error? [email protected]