LoftChart

Cobra Snakebite Wedges Specifications

Every loft, bounce and grind combination the Cobra Snakebite wedges are sold in, 2023–2025.

Check Cobra Snakebite prices on eBay Affiliate link
Years produced
2023–2025
Category
Tour / Players Wedges
Construction
cast head with CNC-milled face and grooves
Material
cast steel (alloy not published), satin chrome, QPQ black or raw finish
Loft range
48°–60°
Options
13 loft/bounce/grind combinations

Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.

Loft, bounce & grind chart

Loft, bounce and grind options for the Cobra Snakebite wedges.
Loft (°)Bounce (°)GrindLie (°)Length (in)
48°8°V6435.75
50°8°V6435.75
52°8°V6435.75
52°12°C6435.75
54°10°V6435.5
56°7°W6435.5
56°10°V6435.5
56°12°C6435.5
58°6°W6435.25
58°8°V6435.25
60°4°W6435.25
60°8°V6435.25
60°11°C6435.25

Each row is one combination the model is sold in, factory standard. Loft and lie on an individual wedge may differ if it has been bent during a fitting.

Shop Cobra Snakebite

Compare prices for new and used sets on eBay:

See eBay listings

We may earn a commission from purchases made through links on this page at no extra cost to you.

Loft and bounce options

Cobra Snakebite loft and bounce optionsChart of every loft and bounce combination offered, with the grinds available at each: 48° loft, 8° bounce (V); 50° loft, 8° bounce (V); 52° loft, 8° bounce (V); 52° loft, 12° bounce (C); 54° loft, 10° bounce (V); 56° loft, 7° bounce (W); 56° loft, 10° bounce (V); 56° loft, 12° bounce (C); 58° loft, 6° bounce (W); 58° loft, 8° bounce (V); 60° loft, 4° bounce (W); 60° loft, 8° bounce (V); 60° loft, 11° bounce (C).0°4°8°12°4850525456586048° / 8° bounce / VV50° / 8° bounce / VV52° / 8° bounce / VV52° / 12° bounce / CC54° / 10° bounce / VV56° / 7° bounce / WW56° / 10° bounce / VV56° / 12° bounce / CC58° / 6° bounce / WW58° / 8° bounce / VV60° / 4° bounce / WW60° / 8° bounce / VV60° / 11° bounce / CCBounceLoft
Every loft and bounce combination the Cobra Snakebite is sold in — 13 options across 7 lofts. The letters above each point are the grinds available there.

About the Cobra Snakebite

The Snakebite is Cobra's 2023 tour wedge generation, announced in March 2023, with the unplated Raw finish added in March 2024. Its CNC-milled SNAKEBITE grooves are 11 percent deeper with 40 percent sharper edges than the previous generation, cut narrow and deep on the 48 to 54 degree heads and wider, shallower and full-face on 56 to 60. The matrix runs 13 loft/bounce/grind combinations from 48 to 60 degrees across three grinds. Cobra replaced the line with the KING and KING X wedges in March 2025. A one-length build and the cavity-back Snakebite-X variant were sold alongside the standard model and are not charted here.

Grind options

The sole grinds this model is sold in, with the lofts each one is available at.

Versatile Grind48°, 50°, 52°, 54°, 56°, 58°, 60°
The all-around grind for medium to firm conditions, with heel, toe and trailing-edge relief for open-face shots and a centre notch that keeps the leading edge close to the ground without adding effective bounce.
Classic Grind52°, 56°, 60°
A medium-width, higher-bounce sole with progressive width from heel to toe and trailing-edge relief, for neutral to steeper swings in a variety of conditions.
Widelow Grind56°, 58°, 60°
A wide, low-bounce sole for soft bunkers, soft turf and medium rough that keeps the leading edge from digging.

Stock shafts

  • KBS Hi-Rev 2.0 — steel · 125g · flexes: Wedge

Related models

Wedge loft guides

How each loft slot this model covers fits into a gapped bag:

Frequently asked questions

What lofts does the Cobra Snakebite come in?

The Snakebite was sold from 48 to 60 degrees — 13 loft, bounce and grind combinations across the Versatile, Classic and Widelow grinds.

What grinds does the Cobra Snakebite offer?

Three: Versatile (8-10 degrees of bounce, every loft), Classic (11-12 degrees, 52-60) and the wide low-bounce Widelow (4-7 degrees, 56-60).

Is the Cobra Snakebite still in production?

No. Cobra replaced it with the KING and KING X wedges in March 2025, so the used and closeout market is the source — the Raw finish version was the last addition, in 2024.

Finding one used

The Cobra Snakebite ran from 2023 to 2025 and is no longer in production, so the used market is the only source. Search the used listings on eBay. Check the loft and bounce against the chart above before buying used — wedges are routinely bent from standard, and worn grooves cost spin long before a wedge looks worn.

Data compiled from:
  • Golfio Cobra King Snakebite retailer spec table (the full 13-row matrix with lie, length and swing weight), golfio.com, accessed October 2026
  • Golf Galaxy Snakebite listing (independent matrix cross-check), golfgalaxy.com, accessed October 2026
  • Plugged In Golf and GolfMagic launch coverage (announced 14 March 2023, finishes, grinds), accessed October 2026
  • Driving Range Heroes Snakebite Raw coverage (Raw finish added March 2024, shafts), drivingrangeheroes.com
  • Note: Cobra's own Snakebite product pages are no longer online — the current Cobra wedge line is the 2025 KING — so the matrix is from two retailer charts in agreement with Cobra's published fact sheet fragments. The head alloy was never published.

Last updated 22 October 2026. Spot an error? info@loftchart.com