Ben Hogan PTx Pro vs Ben Hogan Legend
Side-by-side factory specifications. Differing values are highlighted.
Specification comparison
| Club | PTx Pro loft | Legend loft | PTx Pro lie | Legend lie | PTx Pro length | Legend length |
|---|---|---|---|---|---|---|
| 4 | 22 | 20 | 60 | 60.5 | 39 | 39 |
| 5 | 26 | 23.5 | 61 | 61 | 38.25 | 38.25 |
| 6 | 30 | 26.5 | 62 | 61.5 | 37.5 | 37.5 |
| 7 | 34 | 30.5 | 62.5 | 62 | 37 | 37 |
| 8 | 38 | 35 | 63 | 62.5 | 36.5 | 36.5 |
| 9 | 42 | 39 | 63.5 | 63 | 36 | 36 |
| PW | 46 | 44 | 64 | 63.5 | 35.75 | 35.75 |
Highlighted cells differ between the two sets. Lofts and lies are factory standard.
Lofts compared
- PTx Pro
- Legend
What the differences mean
At the 7-iron, the PTx Pro is 34° and the Legend is 30.5°, a 3.5° gap. Each degree of loft is worth roughly 3 to 4 yards of carry at the same swing speed, so the Legend should carry roughly 10 to 14 yards further with that club, on a slightly lower, shallower flight than the PTx Pro. Across the 7 clubs both sets share, the Legend averages 2.8° stronger, with the largest gap at the 6-iron (30° vs 26.5°). The pitching wedges are 46° and 44°; the stronger one leaves a 6° jump to a 50° gap wedge, which matters when planning wedge gapping. Beyond loft, the Legend 7-iron sits 0.5° flatter (62.5° vs 62°), which nudges start direction slightly right for a right-hander.
Both are players distance irons, built for roughly 5 to 15 handicaps who want extra distance from a compact head. Forged or multi-material heads that keep a compact look while adding face technology and stronger lofts for distance. Because they target the same golfer, the decision comes down to the specific loft, feel and shaping differences rather than who the sets are made for.
The PTx Pro is listed as co-forged multi-material and the Legend as hollow body, forged face, foam-filled interior. The Legend's hollow body lets the face flex more and moves mass low and outward, usually giving higher launch and more ball speed on off-centre strikes than the PTx Pro, at some cost in feel. The PTx Pro adds tungsten weighting, which lowers the centre of gravity and raises stability on mis-hits, helping the long irons launch.
There are 6 years between these sets (2019 and 2025), more than one design generation. Over that time irons moved toward stronger lofts, thinner and faster faces, hollow and multi-material heads and wider use of tungsten, so the newer set is not simply a better version of the older one: it may launch and spin quite differently. Here the 7-iron loft moved from 34° to 30.5°.
Which should you choose?
The Legend is the stronger-lofted set — up to 3.5° stronger than the PTx Pro on matching clubs. Expect longer carry per numbered iron but a flatter descent angle; gapping at the wedge end is where that shows up.
Both charts are reproduced in full on their own pages: Ben Hogan PTx Pro specs and Ben Hogan Legend specs.
Frequently asked questions
Is the Ben Hogan PTx Pro stronger lofted than the Legend?
No. The Legend is the stronger-lofted set: its 7-iron is 30.5° against 34° for the Ben Hogan PTx Pro, 3.5° stronger and worth roughly 10 to 14 yards of extra carry.
What is the loft difference between the Ben Hogan PTx Pro and Legend?
At the 7-iron the difference is 3.5° (34° vs 30.5°). The largest gap on a shared club is 3.5° at the 6-iron, and all 7 shared clubs differ.
Are the Ben Hogan PTx Pro and Legend aimed at the same golfer?
Yes. Both are players distance irons, built for roughly 5 to 15 handicaps who want extra distance from a compact head. Choose on feel, looks and gapping, ideally after hitting both.
Do the Ben Hogan PTx Pro and Legend have the same lie and length?
Not exactly. At the 7-iron the Ben Hogan PTx Pro is 62.5° lie and 37 inches, the Legend 62° and 37 inches. Both can be bent or built to your own fit.
Shop Ben Hogan PTx Pro
Compare prices for new and used sets on eBay:
We may earn a commission from purchases made through links on this page at no extra cost to you.