Honma TW767 Hx vs Honma TW767 Vx
Side-by-side factory specifications. Differing values are highlighted.
Specification comparison
| Club | TW767 Hx loft | TW767 Vx loft | TW767 Hx lie | TW767 Vx lie | TW767 Hx length | TW767 Vx length |
|---|---|---|---|---|---|---|
| 4 | — | 21 | — | 60 | — | 38.5 |
| 5 | 22 | 24 | 60.5 | 60.5 | 38 | 38 |
| 6 | 25 | 27 | 61 | 61 | 37.5 | 37.5 |
| 7 | 28 | 30 | 61.5 | 61.5 | 37 | 37 |
| 8 | 32 | 34 | 62 | 62 | 36.5 | 36.5 |
| 9 | 36 | 38 | 62.5 | 62.5 | 36 | 36 |
| P | 41 | 43 | 63 | 63 | 35.5 | 35.5 |
| A | 46 | 49 | 63 | 63 | 35.5 | 35.5 |
Highlighted cells differ between the two sets. Lofts and lies are factory standard.
Lofts compared
- TW767 Hx
- TW767 Vx
What the differences mean
At the 7-iron, the TW767 Hx is 28° and the TW767 Vx is 30°, a 2° gap. Each degree of loft is worth roughly 3 to 4 yards of carry at the same swing speed, so the TW767 Hx should carry roughly 6 to 8 yards further with that club, on a slightly lower, shallower flight than the TW767 Vx. Across the 7 clubs both sets share, the TW767 Vx averages 2.1° weaker, with the largest gap at the A (46° vs 49°).
The sets are built differently: the TW767 Hx runs 5-iron to A (7 clubs), the TW767 Vx 4-iron to A (8 clubs).
The TW767 Hx is a game improvement iron and the TW767 Vx a players iron, so they sit 2 steps apart on the forgiveness scale. The TW767 Hx is the more forgiving design, with a wider sole, more offset and more perimeter weighting for roughly 10 to 25 handicaps. The TW767 Vx trades some of that for a more compact head, thinner topline and more control over flight and shape, which suits roughly scratch to 10 handicaps.
The TW767 Hx is listed as cast hollow body with a maraging steel face and internal tungsten weighting and the TW767 Vx as one-piece forged cavity back with a tungsten toe weight. Forging, as in the TW767 Vx, is generally credited with a softer feel; casting, as in the TW767 Hx, allows more complex cavity and weighting shapes, which is why it dominates forgiving irons. The TW767 Hx's hollow body lets the face flex more and moves mass low and outward, usually giving higher launch and more ball speed on off-centre strikes than the TW767 Vx, at some cost in feel. Both use tungsten weighting to lower the centre of gravity and steady the head on off-centre strikes.
Both sets were introduced in 2024, so this is a choice between two models from the same lineup rather than an upgrade: Honma designed them to sit side by side for different players.
Which should you choose?
The TW767 Vx is the weaker-lofted set — up to 3° weaker than the TW767 Hx. That trades raw distance for a steeper landing angle and more predictable stopping power into greens.
Both charts are reproduced in full on their own pages: Honma TW767 Hx specs and Honma TW767 Vx specs.
Frequently asked questions
Is the Honma TW767 Hx stronger lofted than the TW767 Vx?
Yes. The Honma TW767 Hx 7-iron is 28° against 30° for the TW767 Vx, 2° stronger, which is worth roughly 6 to 8 yards of extra carry with the same swing.
What is the loft difference between the Honma TW767 Hx and TW767 Vx?
At the 7-iron the difference is 2° (28° vs 30°). The largest gap on a shared club is 3° at the A, and all 7 shared clubs differ.
Which is better for higher handicap golfers, the Honma TW767 Hx or the TW767 Vx?
The Honma TW767 Hx. As a game improvement iron it is the more forgiving design, suited to roughly 10 to 25 handicaps. The TW767 Vx is a players iron, better suited to roughly scratch to 10 handicaps.
Do the Honma TW767 Hx and TW767 Vx have the same lie and length?
At the 7-iron, yes: both are 61.5° lie and 37 inches long.
Shop Honma TW767 Hx
Compare prices for new and used sets on eBay:
We may earn a commission from purchases made through links on this page at no extra cost to you.