Mizuno JPX-925 Hot Metal HL vs Mizuno JPX-925 Hot Metal
Side-by-side factory specifications. Differing values are highlighted.
Specification comparison
| Club | JPX-925 Hot Metal HL loft | JPX-925 Hot Metal loft | JPX-925 Hot Metal HL lie | JPX-925 Hot Metal lie | JPX-925 Hot Metal HL length | JPX-925 Hot Metal length |
|---|---|---|---|---|---|---|
| 4 | 22 | 19 | 60.5 | 60.5 | 38.75 | 38.75 |
| 5 | 25 | 22 | 61 | 61 | 38.25 | 38.25 |
| 6 | 28 | 25 | 61.5 | 61.5 | 37.75 | 37.75 |
| 7 | 31 | 28 | 62 | 62 | 37.25 | 37.25 |
| 8 | 35 | 32.5 | 62.5 | 62.5 | 36.75 | 36.75 |
| 9 | 40 | 37 | 63 | 63 | 36.25 | 36.25 |
| PW | 45 | 42 | 63.5 | 63.5 | 35.75 | 35.75 |
| GW | 50 | 48 | 64 | 64 | 35.5 | 35.5 |
| SW | 55 | 54 | 64 | 64 | 35.25 | 35.25 |
Highlighted cells differ between the two sets. Lofts and lies are factory standard.
Lofts compared
- JPX-925 Hot Metal HL
- JPX-925 Hot Metal
What the differences mean
At the 7-iron, the JPX-925 Hot Metal HL is 31° and the JPX-925 Hot Metal is 28°, a 3° gap. Each degree of loft is worth roughly 3 to 4 yards of carry at the same swing speed, so the JPX-925 Hot Metal should carry roughly 9 to 12 yards further with that club, on a slightly lower, shallower flight than the JPX-925 Hot Metal HL. Across the 9 clubs both sets share, the JPX-925 Hot Metal averages 2.6° stronger, with the largest gap at the 4-iron (22° vs 19°). The pitching wedges are 45° and 42°; the stronger one leaves a 8° jump to a 50° gap wedge, which matters when planning wedge gapping.
The JPX-925 Hot Metal HL is a super game improvement iron and the JPX-925 Hot Metal a game improvement iron, so they sit one step apart on the forgiveness scale. The JPX-925 Hot Metal HL is the more forgiving design, with a wider sole, more offset and more perimeter weighting for high handicaps, beginners and slower swing speeds. The JPX-925 Hot Metal trades some of that for a more compact head, thinner topline and more control over flight and shape, which suits roughly 10 to 25 handicaps.
Both heads are listed as cast multi-material with a thin face and tungsten weighting. Both use tungsten weighting to lower the centre of gravity and steady the head on off-centre strikes.
Both sets were introduced in 2024, so this is a choice between two models from the same lineup rather than an upgrade: Mizuno designed them to sit side by side for different players.
Which should you choose?
The JPX-925 Hot Metal is the stronger-lofted set — up to 3° stronger than the JPX-925 Hot Metal HL on matching clubs. Expect longer carry per numbered iron but a flatter descent angle; gapping at the wedge end is where that shows up.
Both charts are reproduced in full on their own pages: Mizuno JPX-925 Hot Metal HL specs and Mizuno JPX-925 Hot Metal specs.
Frequently asked questions
Is the Mizuno JPX-925 Hot Metal HL stronger lofted than the JPX-925 Hot Metal?
No. The JPX-925 Hot Metal is the stronger-lofted set: its 7-iron is 28° against 31° for the Mizuno JPX-925 Hot Metal HL, 3° stronger and worth roughly 9 to 12 yards of extra carry.
What is the loft difference between the Mizuno JPX-925 Hot Metal HL and JPX-925 Hot Metal?
At the 7-iron the difference is 3° (31° vs 28°). The largest gap on a shared club is 3° at the 4-iron, and all 9 shared clubs differ.
Which is better for higher handicap golfers, the Mizuno JPX-925 Hot Metal HL or the JPX-925 Hot Metal?
The Mizuno JPX-925 Hot Metal HL. As a super game improvement iron it is the more forgiving design, suited to high handicaps, beginners and slower swing speeds. The JPX-925 Hot Metal is a game improvement iron, better suited to roughly 10 to 25 handicaps.
Do the Mizuno JPX-925 Hot Metal HL and JPX-925 Hot Metal have the same lie and length?
At the 7-iron, yes: both are 62° lie and 37.25 inches long.
Shop both models
Compare prices for new and used sets on eBay:
We may earn a commission from purchases made through links on this page at no extra cost to you.