Mizuno MP-53 vs Mizuno MX-300
Side-by-side factory specifications. Differing values are highlighted.
Specification comparison
| Club | MP-53 loft | MX-300 loft | MP-53 lie | MX-300 lie | MP-53 length | MX-300 length |
|---|---|---|---|---|---|---|
| 3 | 21 | 20 | 59.5 | 59.5 | 38.75 | 38.75 |
| 4 | 24 | 23 | 60 | 60 | 38.25 | 38.25 |
| 5 | 27 | 26 | 60.5 | 60.5 | 37.75 | 37.75 |
| 6 | 30 | 29 | 61 | 61 | 37.25 | 37.25 |
| 7 | 34 | 33 | 61.5 | 61.5 | 36.75 | 36.75 |
| 8 | 38 | 37 | 62 | 62 | 36.25 | 36.25 |
| 9 | 42 | 41 | 62.5 | 62.5 | 35.75 | 35.75 |
| PW | 46 | 45 | 63 | 63 | 35.5 | 35.5 |
| GW | — | 50 | — | 63 | — | 35.25 |
Highlighted cells differ between the two sets. Lofts and lies are factory standard.
Lofts compared
- MP-53
- MX-300
What the differences mean
At the 7-iron, the MP-53 is 34° and the MX-300 is 33°, a 1° gap. Each degree of loft is worth roughly 3 to 4 yards of carry at the same swing speed, so the MX-300 should carry roughly 3 to 4 yards further with that club, on a slightly lower, shallower flight than the MP-53. Across the 8 clubs both sets share, the MX-300 averages 1° stronger, with the largest gap at the 3-iron (21° vs 20°). The pitching wedges are 46° and 45°; the stronger one leaves a 5° jump to a 50° gap wedge, which matters when planning wedge gapping.
The sets are built differently: the MP-53 runs 3-iron to PW (8 clubs), the MX-300 3-iron to GW (9 clubs).
Both are players irons, built for roughly scratch to 10 handicaps. Small-to-mid cavity backs with traditional lofts, modest offset and workable shaping for low-handicap players. Because they target the same golfer, the decision comes down to the specific loft, feel and shaping differences rather than who the sets are made for.
The MP-53 is listed as forged and the MX-300 as Grain Flow Forged with an undercut cavity. With the build method this similar, differences in feel come down to head size, sole width, topline and offset rather than how the heads are made.
Both sets were introduced in 2010, so this is a choice between two models from the same lineup rather than an upgrade: Mizuno designed them to sit side by side for different players.
Which should you choose?
The MX-300 is the stronger-lofted set — up to 1° stronger than the MP-53 on matching clubs. Expect longer carry per numbered iron but a flatter descent angle; gapping at the wedge end is where that shows up.
Both charts are reproduced in full on their own pages: Mizuno MP-53 specs and Mizuno MX-300 specs.
Frequently asked questions
Is the Mizuno MP-53 stronger lofted than the MX-300?
No. The MX-300 is the stronger-lofted set: its 7-iron is 33° against 34° for the Mizuno MP-53, 1° stronger and worth roughly 3 to 4 yards of extra carry.
What is the loft difference between the Mizuno MP-53 and MX-300?
At the 7-iron the difference is 1° (34° vs 33°). The largest gap on a shared club is 1° at the 3-iron, and all 8 shared clubs differ.
Are the Mizuno MP-53 and MX-300 aimed at the same golfer?
Yes. Both are players irons, built for roughly scratch to 10 handicaps. Choose on feel, looks and gapping, ideally after hitting both.
Do the Mizuno MP-53 and MX-300 have the same lie and length?
At the 7-iron, yes: both are 61.5° lie and 36.75 inches long.
Shop both models
Compare prices for new and used sets on eBay:
We may earn a commission from purchases made through links on this page at no extra cost to you.