PXG 0311 T GEN1 vs PXG 0311 T GEN2
Side-by-side factory specifications. Differing values are highlighted.
Specification comparison
| Club | 0311 T GEN1 loft | 0311 T GEN2 loft | 0311 T GEN1 lie | 0311 T GEN2 lie | 0311 T GEN1 length | 0311 T GEN2 length |
|---|---|---|---|---|---|---|
| 3 | 20 | 20 | 60.5 | 60.5 | 39.5 | 39.5 |
| 4 | 22.5 | 22.5 | 61 | 61 | 38.875 | 38.875 |
| 5 | 25 | 25 | 61.5 | 61.5 | 38.25 | 38.25 |
| 6 | 28 | 28 | 62 | 62 | 37.625 | 37.625 |
| 7 | 32 | 32 | 62.5 | 62.5 | 37 | 37 |
| 8 | 36 | 36 | 63 | 63 | 36.5 | 36.5 |
| 9 | 41 | 41 | 63.5 | 63.5 | 36 | 36 |
| PW | 46 | 46 | 64 | 64 | 35.75 | 35.75 |
Highlighted cells differ between the two sets. Lofts and lies are factory standard.
Lofts compared
- 0311 T GEN1
- 0311 T GEN2
What the differences mean
Every club the two sets share has exactly the same loft, starting with a 32° 7-iron. On paper there is no distance or trajectory difference: with the same swing, a 7-iron from either set should launch and carry about the same. The real differences are in how the heads are built, how they look at address and how they feel at impact, none of which a spec table can show. Lie angles and lengths match as well, so any fitting adjustment made to one set would carry straight over to the other.
Both are players irons, built for roughly scratch to 10 handicaps. Small-to-mid cavity backs with traditional lofts, modest offset and workable shaping for low-handicap players. Because they target the same golfer, the decision comes down to the specific loft, feel and shaping differences rather than who the sets are made for.
The 0311 T GEN1 is listed as forged hollow body with TPE injection and tungsten perimeter weighting and the 0311 T GEN2 as forged hollow body with a COR2 core. Both use hollow-body heads, so both trade a little feel for face flex and launch help. Both use tungsten weighting to lower the centre of gravity and steady the head on off-centre strikes.
The 0311 T GEN2 arrived 3 years after the 0311 T GEN1, a typical one-generation refresh. Changes over that span are usually incremental: refined face thickness, revised weighting, updated looks and small loft tweaks rather than a new concept.
Which should you choose?
The 0311 T GEN1 and 0311 T GEN2 share the same lofts on every club on file, so the difference is in head construction, feel and forgiveness rather than trajectory.
Both charts are reproduced in full on their own pages: PXG 0311 T GEN1 specs and PXG 0311 T GEN2 specs.
Frequently asked questions
Is the PXG 0311 T GEN1 stronger lofted than the 0311 T GEN2?
No. Both have a 32° 7-iron and the same loft on every club they share, so neither is stronger lofted. The difference is in construction and feel.
What is the loft difference between the PXG 0311 T GEN1 and 0311 T GEN2?
There is none. Every club both sets include has the same loft, including the 32° 7-iron.
Are the PXG 0311 T GEN1 and 0311 T GEN2 aimed at the same golfer?
Yes. Both are players irons, built for roughly scratch to 10 handicaps. Choose on feel, looks and gapping, ideally after hitting both.
Do the PXG 0311 T GEN1 and 0311 T GEN2 have the same lie and length?
At the 7-iron, yes: both are 62.5° lie and 37 inches long.
Shop PXG 0311 T GEN1
Compare prices for new and used sets on eBay:
We may earn a commission from purchases made through links on this page at no extra cost to you.