Titleist 690.CB vs Titleist 731.PM

Side-by-side factory specifications. Differing values are highlighted.

Specification comparison

Club690.CB loft731.PM loft690.CB lie731.PM lie690.CB length731.PM length
21818586139.2539.5
3212058.56138.7539
4242359.56238.2538.5
527266062.537.7538
63129616337.2537.5
7353361.56336.7537
839376263.536.2536.5
9434162.564.535.7536
PW47456364.535.2535.75
W51—63—35.25—

Highlighted cells differ between the two sets. Lofts and lies are factory standard.

Lofts compared

  • 690.CB
  • 731.PM
690.CB and 731.PM lofts comparedLine chart of loft in degrees by club for the 690.CB and the 731.PM. 2: 18 and 18. 3: 21 and 20. 4: 24 and 23. 5: 27 and 26. 6: 31 and 29. 7: 35 and 33. 8: 39 and 37. 9: 43 and 41. PW: 47 and 45. W: 51 and none.10°20°30°40°50°60°23456789PWW690.CB 2: 18°690.CB 3: 21°690.CB 4: 24°690.CB 5: 27°690.CB 6: 31°690.CB 7: 35°690.CB 8: 39°690.CB 9: 43°690.CB PW: 47°690.CB W: 51°731.PM 2: 18°731.PM 3: 20°731.PM 4: 23°731.PM 5: 26°731.PM 6: 29°731.PM 7: 33°731.PM 8: 37°731.PM 9: 41°731.PM PW: 45°Loft
Lofts differ on 8 of the 9 clubs the two sets share. A lower point is a stronger loft.

What the differences mean

At the 7-iron, the 690.CB is 35° and the 731.PM is 33°, a 2° gap. Each degree of loft is worth roughly 3 to 4 yards of carry at the same swing speed, so the 731.PM should carry roughly 6 to 8 yards further with that club, on a slightly lower, shallower flight than the 690.CB. Across the 9 clubs both sets share, the 731.PM averages 1.4° stronger, with the largest gap at the 6-iron (31° vs 29°). The pitching wedges are 47° and 45°; the stronger one leaves a 5° jump to a 50° gap wedge, which matters when planning wedge gapping. Beyond loft, the 690.CB 7-iron sits 1.5° flatter (61.5° vs 63°), which nudges start direction slightly right for a right-hander; the 731.PM 7-iron is 0.25 inches longer (36.75" vs 37").

The sets are built differently: the 690.CB runs 2-iron to W (10 clubs), the 731.PM 2-iron to PW (9 clubs).

The 690.CB is a players iron and the 731.PM a blade iron, so they sit one step apart on the forgiveness scale. The 690.CB is the more forgiving design, with a wider sole, more offset and more perimeter weighting for roughly scratch to 10 handicaps. The 731.PM trades some of that for a more compact head, thinner topline and more control over flight and shape, which suits low single-digit handicaps who strike the ball consistently.

The 690.CB is listed as forged cavity back and the 731.PM as investment cast blended set - cavity back long irons, muscle cavity mid irons, muscleback short irons. Forging, as in the 690.CB, is generally credited with a softer feel; casting, as in the 731.PM, allows more complex cavity and weighting shapes, which is why it dominates forgiving irons. The 731.PM's muscle-back shape keeps mass directly behind the strike for feedback and control, where a cavity spreads it to the perimeter for forgiveness.

Both sets were introduced in 2002, so this is a choice between two models from the same lineup rather than an upgrade: Titleist designed them to sit side by side for different players.

Which should you choose?

The 731.PM is the stronger-lofted set — up to 2° stronger than the 690.CB on matching clubs. Expect longer carry per numbered iron but a flatter descent angle; gapping at the wedge end is where that shows up.

Both charts are reproduced in full on their own pages: Titleist 690.CB specs and Titleist 731.PM specs.

Frequently asked questions

Is the Titleist 690.CB stronger lofted than the 731.PM?

No. The 731.PM is the stronger-lofted set: its 7-iron is 33° against 35° for the Titleist 690.CB, 2° stronger and worth roughly 6 to 8 yards of extra carry.

What is the loft difference between the Titleist 690.CB and 731.PM?

At the 7-iron the difference is 2° (35° vs 33°). The largest gap on a shared club is 2° at the 6-iron, and 8 of the 9 shared clubs differ.

Which is better for higher handicap golfers, the Titleist 690.CB or the 731.PM?

The Titleist 690.CB. As a players iron it is the more forgiving design, suited to roughly scratch to 10 handicaps. The 731.PM is a blade iron, better suited to low single-digit handicaps who strike the ball consistently.

Do the Titleist 690.CB and 731.PM have the same lie and length?

Not exactly. At the 7-iron the Titleist 690.CB is 61.5° lie and 36.75 inches, the 731.PM 63° and 37 inches. Both can be bent or built to your own fit.

Shop both models

Compare prices for new and used sets on eBay:

We may earn a commission from purchases made through links on this page at no extra cost to you.