Yonex EZONE GS vs Yonex EZONE GS i-Tech
Side-by-side factory specifications. Differing values are highlighted.
Specification comparison
| Club | EZONE GS loft | EZONE GS i-Tech loft | EZONE GS lie | EZONE GS i-Tech lie | EZONE GS length | EZONE GS i-Tech length |
|---|---|---|---|---|---|---|
| 4 | — | 21 | — | 61 | — | 39.5 |
| 5 | 23 | 23 | 61.5 | 61.5 | 38.25 | 38.75 |
| 6 | 26 | 26 | 62 | 62 | 37.75 | 38 |
| 7 | 29 | 29 | 62.5 | 62.5 | 37.25 | 37.5 |
| 8 | 33 | 33 | 63 | 63 | 36.75 | 37 |
| 9 | 38 | 38 | 63.5 | 63.5 | 36.25 | 36.5 |
| PW | 43 | 43 | 64 | 64 | 35.75 | 36 |
| AW | 48 | 48 | 64 | 64 | 35.5 | 35.75 |
| SW | 54 | 54 | 64 | 64 | 35.25 | 35.5 |
Highlighted cells differ between the two sets. Lofts and lies are factory standard.
Lofts compared
- EZONE GS
- EZONE GS i-Tech
What the differences mean
Every club the two sets share has exactly the same loft, starting with a 29° 7-iron. On paper there is no distance or trajectory difference: with the same swing, a 7-iron from either set should launch and carry about the same. The real differences are in how the heads are built, how they look at address and how they feel at impact, none of which a spec table can show.
The sets are built differently: the EZONE GS runs 5-iron to SW (8 clubs), the EZONE GS i-Tech 4-iron to SW (9 clubs).
Both are game improvement irons, built for roughly 10 to 25 handicaps. Perimeter-weighted cavity backs with wider soles, more offset and stronger lofts, aimed at mid handicaps. Because they target the same golfer, the decision comes down to the specific loft, feel and shaping differences rather than who the sets are made for.
The EZONE GS is listed as four-piece graphite-hybrid (cast body, maraging face, tungsten plate, graphite insert) and the EZONE GS i-Tech as four-piece graphite-hybrid (cast body, maraging face, tungsten plate, graphite insert) with G-Brid flexing face. Both use tungsten weighting to lower the centre of gravity and steady the head on off-centre strikes.
The EZONE GS i-Tech arrived 2 years after the EZONE GS, a typical one-generation refresh. Changes over that span are usually incremental: refined face thickness, revised weighting, updated looks and small loft tweaks rather than a new concept.
Which should you choose?
The EZONE GS and EZONE GS i-Tech share the same lofts on every club on file, so the difference is in head construction, feel and forgiveness rather than trajectory.
Both charts are reproduced in full on their own pages: Yonex EZONE GS specs and Yonex EZONE GS i-Tech specs.
Frequently asked questions
Is the Yonex EZONE GS stronger lofted than the EZONE GS i-Tech?
No. Both have a 29° 7-iron and the same loft on every club they share, so neither is stronger lofted. The difference is in construction and feel.
What is the loft difference between the Yonex EZONE GS and EZONE GS i-Tech?
There is none. Every club both sets include has the same loft, including the 29° 7-iron.
Are the Yonex EZONE GS and EZONE GS i-Tech aimed at the same golfer?
Yes. Both are game improvement irons, built for roughly 10 to 25 handicaps. Choose on feel, looks and gapping, ideally after hitting both.
Do the Yonex EZONE GS and EZONE GS i-Tech have the same lie and length?
Not exactly. At the 7-iron the Yonex EZONE GS is 62.5° lie and 37.25 inches, the EZONE GS i-Tech 62.5° and 37.5 inches. Both can be bent or built to your own fit.
Shop both models
Compare prices for new and used sets on eBay:
We may earn a commission from purchases made through links on this page at no extra cost to you.