Mizuno MX-1000 Irons Specifications
Full factory loft, lie and length chart for the Mizuno MX-1000 irons, 2009–2011.
- Years produced
- 2009–2011
- Category
- Super Game Improvement Irons
- Construction
- hollow body with a plasma-welded hot metal face
- Material
- ES230 maraging steel face welded to a stainless steel body
- Set makeup
- 4–SW
Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) | Bounce |
|---|---|---|---|---|---|
| 4 | 22 | 60 | 38.25 | 0.213 | -1 |
| 5 | 25 | 60.5 | 37.75 | 0.203 | -0.5 |
| 6 | 28 | 61 | 37.25 | 0.193 | 0 |
| 7 | 32 | 61.5 | 36.75 | 0.183 | 1 |
| 8 | 36 | 62 | 36.25 | 0.173 | 2 |
| 9 | 40 | 62.5 | 35.75 | 0.163 | 3 |
| PW | 44 | 63 | 35.5 | 0.154 | 4 |
| GW | 49 | 63 | 35.25 | 0.144 | 5 |
| SW | 55 | 63 | 35.25 | 0.114 | 11 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Mizuno MX-1000
The MX-1000 was the hot-face, maximum-distance flagship of Mizuno's MX range, launched in 2009 alongside the compact MX-300. Its hollow heads plasma-weld a thin ES230 maraging steel face to a stainless body for high COR, with Mizuno's Y-Tune weighting spreading the sweet area toward the toe, a 23.5 mm wide sole and strong lofts — 32 degrees at the 7-iron and a 44-degree pitching wedge. The catalogued set runs 4-iron through sand wedge, and the whole MX range gave way to the JPX-800 family from 2011.
Stock shafts
- True Temper GS95 — steel · flexes: R300, S300
- Mizuno Exsar IS4 — graphite
- Grafalloy ProLaunch Platinum — graphite
Related models
- Compact partner model of the same generation: Mizuno MX-300
- The hybrid-style super-game-improvement set before it: Mizuno MX-100
- Successor: Mizuno JPX-800
- Compare: Mizuno MX-1000 vs Mizuno MX-100
- Compare: Mizuno MX-1000 vs Mizuno MX-300
Frequently asked questions
What is the loft of a Mizuno MX-1000 7-iron?
The Mizuno MX-1000 7-iron has a loft of 32 degrees, with a 61.5-degree lie and a 36.75-inch steel-shaft length — strong lofts for 2009, two degrees ahead of the MX-19.
Are the Mizuno MX-1000 irons forged?
No. The MX-1000 is a hollow-body iron that plasma-welds a thin ES230 maraging steel face to a stainless steel body for a hot, high-COR face — unusual for Mizuno, which is best known for forgings.
What clubs came in the Mizuno MX-1000 set?
The catalogued set ran 4-iron through sand wedge, with a 44-degree pitching wedge, 49-degree gap wedge and 55-degree sand wedge.
Finding a used set
The Mizuno MX-1000 ran from 2009 to 2011 and is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- golfclubspec.com iron specification database, Mizuno MX-1000 entry (iron_results.php?id=270) — supplied every loft, lie, length, offset and bounce above and the GS95 / Exsar IS4 / ProLaunch Platinum stock shafts.
- golfclubspec.com iron specification database via qsponge.com — same loft and lie figures independently retrieved, 4-iron through gap wedge.
- golfmagic.com and todays-golfer.com MX-1000 reviews — corroborate the 2009 launch, hollow plasma-welded hot metal construction, 23.5 mm sole width and GS95/Exsar stock shafts. golfclubspec catalogues the model under 2011, its final season; year_introduced follows the 2009 announcement and reviews.
- Note: swing weight is omitted — the spec database's swing weight column was empty. Confidence is medium: full specs come from a secondary database, corroborated on construction and shafts by contemporary reviews.
Last reviewed 2026-07-29. Spot an error? [email protected]