LoftChart

Mizuno Pro T-3 Wedges Specifications

Every loft, bounce and grind combination the Mizuno Pro T-3 wedges are sold in, 2025–present.

Check Mizuno Pro T-3 prices on eBay Affiliate link
Years produced
2025–present
Category
Tour / Players Wedges
Construction
one-piece Grain Flow Forged HD with shallow cavity back, Hiroshima, Japan
Material
1025E Pure Select mild carbon steel with copper underlay
Loft range
46°–60°
Options
11 loft/bounce/grind combinations

Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.

Loft, bounce & grind chart

Loft, bounce and grind options for the Mizuno Pro T-3 wedges.
Loft (°)Bounce (°)GrindLie (°)
46°8°S63
48°10°S63
50°8°S63
52°10°S63
54°8°M63
54°12°S63
56°6°C63
56°10°M63
58°8°C63
58°12°M63
60°10°C63

Each row is one combination the model is sold in, factory standard. Loft and lie on an individual wedge may differ if it has been bent during a fitting.

Shop Mizuno Pro T-3

Compare prices for new and used sets on eBay:

See eBay listings

We may earn a commission from purchases made through links on this page at no extra cost to you.

Loft and bounce options

Mizuno Pro T-3 loft and bounce optionsChart of every loft and bounce combination offered, with the grinds available at each: 46° loft, 8° bounce (S); 48° loft, 10° bounce (S); 50° loft, 8° bounce (S); 52° loft, 10° bounce (S); 54° loft, 8° bounce (M); 54° loft, 12° bounce (S); 56° loft, 6° bounce (C); 56° loft, 10° bounce (M); 58° loft, 8° bounce (C); 58° loft, 12° bounce (M); 60° loft, 10° bounce (C).0°4°8°12°464850525456586046° / 8° bounce / SS48° / 10° bounce / SS50° / 8° bounce / SS52° / 10° bounce / SS54° / 8° bounce / MM54° / 12° bounce / SS56° / 6° bounce / CC56° / 10° bounce / MM58° / 8° bounce / CC58° / 12° bounce / MM60° / 10° bounce / CCBounceLoft
Every loft and bounce combination the Mizuno Pro T-3 is sold in — 11 options across 8 lofts. The letters above each point are the grinds available there.

About the Mizuno Pro T-3

The Pro T-3 is the cavity-back half of Mizuno's 2025 wedge pair, the successor to the S23, launched alongside the Pro T-1 in February 2025. It shares the T-1's Grain Flow Forged HD 1025E construction, copper underlay and loft-specific Quad Cut+ grooves, but adds a shallow cavity back and a slightly longer blade for stability and forgiveness on off-centre strikes. The matrix runs 11 loft/bounce/grind combinations from 46 to 60 degrees across three grinds. Finishes are Soft White Satin and Black Ion. Club lengths are omitted here because US and UK retailer charts disagree on the measuring basis.

Grind options

The sole grinds this model is sold in, with the lofts each one is available at.

S-Type Grind46°, 48°, 50°, 52°, 54°
High bounce with limited relief — heel relief and a bevelled trailing edge — for full shots. The grind at the strong lofts from 46 to 54 degrees.
M-Type Grind54°, 56°, 58°
Mid bounce with moderate heel and toe relief for gentle face manipulation, replacing the old D grind.
C-Type Grind56°, 58°, 60°
Generous heel, toe and trailing-edge relief for a wide range of players and conditions — the T-3's highest-loft grind.

Stock shafts

  • KBS Hi-Rev 2.0 115 — steel · 115g · flexes: Wedge

Related models

Wedge loft guides

How each loft slot this model covers fits into a gapped bag:

Frequently asked questions

What lofts does the Mizuno Pro T-3 come in?

The Pro T-3 is sold from 46 to 60 degrees — 11 loft, bounce and grind combinations across the S, M and C grinds.

What is the difference between the Mizuno Pro T-1 and Pro T-3?

Both are Grain Flow Forged HD from 1025E steel, but the T-3 adds a shallow cavity back and a slightly longer blade for forgiveness, and trims the grind matrix to three grinds against the T-1's six.

What grinds does the Mizuno Pro T-3 offer?

Three: S-Type at the strong lofts (46-54 degrees), M-Type mid bounce (54-58) and C-Type with generous relief (56-60).

Where it sits in the lineup

Introduced in 2025, the Mizuno Pro T-3 is a current tour wedge in the Mizuno range as of October 2026, with no replacement announced. It replaced the Mizuno S23. New wedges are built to the loft, bounce and grind options in the chart above; a fitting can bend loft and lie from standard, so confirm the numbers on the order sheet. Check the loft and bounce against the chart above before buying used — wedges are routinely bent from standard, and worn grooves cost spin long before a wedge looks worn.

Data compiled from:
  • Mizuno USA Pro T-3 wedge page (46-60 degree range, S/M/C grind descriptions, 1025E Pure Select, KBS Hi-Rev 2.0 115 stock shaft), usa.mizuno.com, accessed October 2026
  • Mizuno EMEA Pro T-3 page (confirms a six-combination European subset of the matrix), emea.mizuno.com, accessed October 2026
  • 2nd Swing retailer spec chart (the full 11-row matrix and 63-degree lie, matched by Golfio and Plugged In Golf's grind-by-loft mapping), accessed October 2026
  • Golfalot Pro T-3 review (launch early 2025, successor to the S23, cavity-back difference from the T-1), golfalot.com
  • Note: the full matrix is from retailer charts in agreement rather than a Mizuno-hosted table; club lengths are omitted because US and UK charts disagree on the measuring basis.

Last updated 22 October 2026. Spot an error? info@loftchart.com