Mizuno Pro TN-87 Irons Specifications

Full factory loft, lie and length chart for the Mizuno Pro TN-87 irons, 1988–1994.

Check Mizuno Pro TN-87 prices on eBay Affiliate link — we may earn a commission at no extra cost to you.
Years produced
1988–1994
Category
Blade / Muscleback
Construction
forged
Material
mild carbon steel with copper underlay plating
Set makeup
2–SW

Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.

Loft, lie & length chart

Standard men's steel-shaft specifications for the Mizuno Pro TN-87 irons.
ClubLoft (°)Lie (°)Length (in)
21856—
3215738.5
4245838
5275937.5
6316037
73560.536.5
8396136
94361.535.5
PW486235
SW5662—

Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.

Shop Mizuno Pro TN-87

Compare prices for new and used sets on eBay:

We may earn a commission from purchases made through links on this page at no extra cost to you.

Loft progression

Mizuno Pro TN-87 loft by clubColumn chart of loft in degrees for each club in the set: 2 18, 3 21, 4 24, 5 27, 6 31, 7 35, 8 39, 9 43, PW 48, SW 56.0°10°20°30°40°50°60°2: 18°18°2+33: 21°21°3+34: 24°24°4+35: 27°27°5+46: 31°31°6+47: 35°35°7+48: 39°39°8+49: 43°43°9+5PW: 48°48°PW+8SW: 56°56°SWClubGapLoft
Loft for each club, 2 to SW. The Gap row is the loft added from one club to the next; gaps run from 3° to 8°.
Mizuno Pro TN-87 7-iron loft angleSide view of the club face tilted 35 degrees back from vertical, the loft of the 7-iron.35°VerticalFaceTarget
The 7-iron face, drawn at its 35° loft from the chart. Head shape is schematic, not to scale.

About the Mizuno Pro TN-87

The Mizuno Pro TN-87 is the most storied blade in Mizuno's catalogue: a Japan-only Grain Flow Forged muscleback named for Tsuneyuki "Tommy" Nakajima and prized for the soft feel of its copper-underlay plating. Nick Faldo won both of his 1990 majors with it, and the head was later remade for other markets as the European TP-2000 and the North American MP-29, which omits the copper layer. Lofts run from an 18-degree 2-iron to a 48-degree pitching wedge with a 35-degree 7-iron; Mizuno reissued the design in limited runs in 2000 and 2014. Lengths below are the Japanese-market steel spec, which runs half an inch shorter than the equivalent US MP-29 build; 2-iron and sand wedge lengths were not published and are omitted.

Related models

Frequently asked questions

What is the loft of a Mizuno Pro TN-87 7-iron?

The Mizuno Pro TN-87 7-iron has a loft of 35 degrees, with a 60.5-degree lie and a 36.5-inch Japanese-spec steel length.

Was the Mizuno TN-87 sold outside Japan?

Not under that name. The head was sold in Europe as the limited-edition TP-2000 and in North America as the MP-29, which uses the same profile without the copper underlay beneath the chrome.

Why is the TN-87 so sought after?

Its combination of Grain Flow Forging and a copper underlay under the plating gives it a famously soft feel, and its association with Tommy Nakajima and Nick Faldo's 1990 major wins made it a cult classic. Mizuno reissued it in limited numbers in 2000 and 2014.

Finding a used set

The Mizuno Pro TN-87 ran from 1988 to 1994 and is no longer in production, so the used market is the only source. Search the used listings on eBay, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.

Data compiled from:
  • GolfWRX Classic Golf And Golfers thread 'Mizuno TN-87' (January 2012): full 2-SW loft/lie table posted from period reference, with the 5-iron original length given as 37.5 inches
  • KEN's Mizuno Pro lineage catalogue notes (ameblo.jp/inuken-2019, 'ミズノプロの系譜(2)'): matching loft/lie table plus lengths 38.5 to 35 inches for 3-PW, 256 g 5-iron head weight and D1-D2 swingweight with Dynamic Gold; the two sources agree throughout
  • Year and history: Mizuno's official Japanese club history (jpn.mizuno.com/golf/clubs/history) lists the Mizuno Pro TN-87 under 1988; the MizunoDBG vintage blog (mizunotp.tech.blog) confirms Japan-only sale from 1988, the Faldo association, the copper underlay, the 2000 and 2014 reissues, and the MP-29/TP-2000 remakes. The '87' in the name refers to its 1987 design year
  • Stock shaft: sold with Dynamic Gold and Japanese FM steel options; no single stock shaft was published, so none is listed

Last updated 29 July 2026. Spot an error? info@loftchart.com