Ping S259 Wedges Specifications

Every loft, bounce and grind combination the Ping S259 wedges are sold in, 2026–present.

Years produced
2026–present
Category
Tour / Players Wedges
Construction
investment cast 8620 carbon steel with elastomer insert
Material
8620 carbon steel, Hydropearl 2.0 chrome or Midnight finish
Loft range
46°–62°
Options
25 loft/bounce/grind combinations

Loft, bounce & grind chart

Loft, bounce and grind options for the Ping S259 wedges.
Loft (°)Bounce (°)GrindLie (°)Length (in)
46°12°S6435.5
48°12°S6435.5
50°12°S6435.5
50°14°W6435.5
52°12°S6435.5
52°14°W6435.5
54°10°H64.335.25
54°12°S64.335.25
54°14°W64.335.25
56°10°H64.335.25
56°12°S64.335.25
56°14°W64.335.25
58°6°T64.535
58°8°B64.535
58°8°E64.535
58°8°H64.535
58°10°S64.535
58°14°W64.535
60°6°T64.535
60°8°B64.535
60°8°E64.535
60°8°H64.535
60°10°S64.535
60°14°W64.535
62°6°T64.535

Each row is one combination the model is sold in, factory standard. Loft and lie on an individual wedge may differ if it has been bent during a fitting.

Shop Ping S259

Compare prices for new and used sets on eBay:

We may earn a commission from purchases made through links on this page at no extra cost to you.

Loft and bounce options

Ping S259 loft and bounce optionsChart of every loft and bounce combination offered, with the grinds available at each: 46° loft, 12° bounce (S); 48° loft, 12° bounce (S); 50° loft, 12° bounce (S); 50° loft, 14° bounce (W); 52° loft, 12° bounce (S); 52° loft, 14° bounce (W); 54° loft, 10° bounce (H); 54° loft, 12° bounce (S); 54° loft, 14° bounce (W); 56° loft, 10° bounce (H); 56° loft, 12° bounce (S); 56° loft, 14° bounce (W); 58° loft, 6° bounce (T); 58° loft, 8° bounce (B, E, H); 58° loft, 10° bounce (S); 58° loft, 14° bounce (W); 60° loft, 6° bounce (T); 60° loft, 8° bounce (B, E, H); 60° loft, 10° bounce (S); 60° loft, 14° bounce (W); 62° loft, 6° bounce (T).0°4°8°12°16°46485052545658606246° / 12° bounce / SS48° / 12° bounce / SS50° / 12° bounce / SS50° / 14° bounce / WW52° / 12° bounce / SS52° / 14° bounce / WW54° / 10° bounce / HH54° / 12° bounce / SS54° / 14° bounce / WW56° / 10° bounce / HH56° / 12° bounce / SS56° / 14° bounce / WW58° / 6° bounce / TT58° / 8° bounce / B·E·HB·E·H58° / 10° bounce / SS58° / 14° bounce / WW60° / 6° bounce / TT60° / 8° bounce / B·E·HB·E·H60° / 10° bounce / SS60° / 14° bounce / WW62° / 6° bounce / TTBounceLoft
Every loft and bounce combination the Ping S259 is sold in — 25 options across 9 lofts. The letters above each point are the grinds available there.

About the Ping S259

The s259 is Ping's 2026 tour wedge line, built on the s159 platform and announced in mid-January 2026 with custom fitting from 13 January. The cast 8620 head carries a larger reshaped elastomer insert behind the face, and the grooves change by loft — tighter-spaced MicroMax grooves from 54 to 62 degrees, milled full-shot grooves from 46 to 52. The matrix runs 25 loft/bounce/grind combinations from 46 to 62 degrees across the six s159-era grinds (S, H, W, T, B, E), with the W grind newly extended down to 50 and 52 degrees. Ping stamps the bounce into each model name, so a 58 T-6 is the 58-degree T grind at 6 degrees of effective bounce. Bounce figures here are Ping's published effective bounce.

Grind options

The sole grinds this model is sold in, with the lofts each one is available at.

S Grind46°, 48°, 50°, 52°, 54°, 56°, 58°, 60°
The mid-to-higher-bounce all-rounder, offered at every loft. Square-face full shots plus heel and trailing-edge relief for greenside creativity; blends into the back of an iron set.
H Grind54°, 56°, 58°, 60°
Based on a Ping Wrx half-moon tour grind. Versatility in softer conditions and for steeper swings or players who manipulate the handle.
W Grind50°, 52°, 54°, 56°, 58°, 60°
Maximum forgiveness through the turf — high bounce for soft turf and sand, steep attack angles and shaft lean. New for s259, it extends down to 50 and 52 degrees.
T Grind58°, 60°, 62°
The lowest effective bounce in the line at 6 degrees, with steeper trailing-edge relief so the face sits lower when opened. For open-face shots from tight lies.
B Grind58°, 60°
Low bounce for shallow attack angles and square setups, with a wider sole for forgiveness in firm conditions.
E Grind58°, 60°
Eye2-inspired sole with mid-sole dishing for soft shots from tight turf and wider back-edge bounce for bunkers and open-face shots, reshaped for a more traditional look at address.

Stock shafts

Related models

Wedge loft guides

How each loft slot this model covers fits into a gapped bag:

Frequently asked questions

What lofts does the Ping s259 come in?

The s259 is sold from 46 to 62 degrees in 2-degree steps — 25 loft, bounce and grind combinations.

What grinds does the Ping s259 offer?

Six, carried over from the s159: S (every loft, 46-60), W (50-60, newly extended to 50 and 52 degrees), H (54-60), and the lob-wedge trio of T (58-62), B (58-60) and the Eye2-inspired E (58-60).

What do the numbers in Ping s259 model names mean?

Ping stamps the effective bounce into the name — an s259 58 T-6 is the 58-degree T grind with 6 degrees of effective bounce. The bounce column in the chart uses those published figures.

What bounce options does the s259 have at 58 and 60 degrees?

Six at each loft: 6 degrees (T grind), 8 degrees in three different soles (B, E and H grinds), 10 degrees (S) and 14 degrees (W).

Where it sits in the lineup

Introduced in 2026, the Ping S259 is a current tour wedge in the Ping range as of October 2026, with no replacement announced. It replaced the Ping s159. New wedges are built to the loft, bounce and grind options in the chart above; a fitting can bend loft and lie from standard, so confirm the numbers on the order sheet. Check the loft and bounce against the chart above before buying used — wedges are routinely bent from standard, and worn grooves cost spin long before a wedge looks worn.

Data compiled from:
  • Ping.com s259 wedge spec table (all 25 combinations, lie, length, swing weight, shafts), ping.com, accessed October 2026
  • Ping s259 press release (announced January 2026, pre-sell and fitting from 13 January; grind descriptions, 8620 cast head, elastomer insert), via golfbusinessnews.com
  • Golfalot s259 coverage (retail end of January 2026, MicroMax grooves, s159 replacement), golfalot.com, accessed October 2026

Last updated 22 October 2026. Spot an error? info@loftchart.com