Srixon Z 945 Irons Specifications
Full factory loft, lie and length chart for the Srixon Z 945 irons, 2014–2016.
- Years produced
- 2014–2016
- Category
- Blade / Muscleback
- Construction
- forged muscleback with a Tour V.T. Sole and double-laser-milled face
- Material
- forged 1020 carbon steel
- Set makeup
- 3–PW
Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) | Swing wt |
|---|---|---|---|---|---|
| 3 | 20 | 60 | 39 | 0.124 | D3 |
| 4 | 23 | 60.5 | 38.5 | 0.112 | D3 |
| 5 | 26 | 61 | 38 | 0.1 | D3 |
| 6 | 29 | 61.5 | 37.5 | 0.096 | D3 |
| 7 | 33 | 62 | 37 | 0.08 | D3 |
| 8 | 37 | 62.5 | 36.5 | 0.072 | D3 |
| 9 | 41 | 63 | 36 | 0.064 | D3 |
| PW | 46 | 63.5 | 35.5 | 0.053 | D3 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Srixon Z 945
The Z 945 is the muscleback at the top of Srixon's first Z-Series, forged from soft 1020 carbon steel with a slim top line, a compact profile and the least offset of the range — 0.124 inches at the 3-iron falling to 0.053 at the pitching wedge. It carries the Tour V.T. Sole, Srixon's cambered grind with a high leading-edge bounce and a relieved trailing edge, and a double-laser-milled face for spin consistency. Lofts are traditional: 33 degrees at the 7-iron and 46 at the pitching wedge. Srixon catalogued the set 3-iron through pitching wedge and sold it stock as 5-PW.
Stock shafts
- True Temper Dynamic Gold — steel
Related models
- Cavity-back sibling: Srixon Z 745
- Game-improvement sibling: Srixon Z 545
- Next generation players iron: Srixon Z 765
- Compare: Srixon Z 945 vs Srixon Z 745
- Compare: Srixon Z 945 vs Srixon Z 545
- Compare: Srixon Z 945 vs Srixon Z 765
Frequently asked questions
What is the loft of a Srixon Z 945 7-iron?
The Srixon Z 945 7-iron has a loft of 33 degrees, a lie of 62 degrees and a steel-shaft length of 37.0 inches.
When were Srixon Z 945 irons made?
The Z 945 arrived with Srixon's first Z Series in 2014 and was replaced by the Z 965 in 2016.
Is the Srixon Z 945 a blade?
Yes — a forged 1020 carbon steel muscleback with a slim top line and 0.080 inches of offset at the 7-iron, the least of the Z Series.
What is the Tour V.T. Sole on the Srixon Z 945?
Srixon's cambered sole grind, with a high leading-edge bounce to stop the club digging and a relieved trailing edge so it exits the turf cleanly. Because the two figures differ, Srixon publishes them separately rather than quoting a single bounce angle.
Finding a used set
The Srixon Z 945 ran from 2014 to 2016 and is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- 2ndswing.com Srixon Z 945 single iron specification table — supplied every loft, lie, length, offset and swing weight above, plus the forged 1020 carbon steel construction, the Tour V.T. Sole and the double-laser-milled face.
- todays-golfer.com 'Srixon Z 945 Irons Review' — independently confirms the 33-degree, 37.00-inch 7-iron, the 3-PW catalogued range with a 5-PW stock set, the True Temper Dynamic Gold stock shaft and the blade description.
- Note on bounce: Srixon publishes leading-edge and trailing-edge bounce separately for the V.T. Sole rather than a single bounce angle, so the bounce key is omitted rather than reduced to one misleading number. This matches the treatment in this database's Srixon Z 745 entry.
- Years follow this database's Srixon Z 745 entry: the Z Series was previewed in 2014 and launched from October 2014, and the Z 965 was announced in 2016.
Last reviewed 2026-07-28. Spot an error? [email protected]