TaylorMade Burner SuperLaunch Irons Specifications
Full factory loft, lie and length chart for the TaylorMade Burner SuperLaunch irons, 2010–2011.
- Years produced
- 2010–2011
- Category
- Super Game Improvement Irons
- Construction
- investment cast
- Material
- stainless steel
- Set makeup
- 3–SW
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) | Swing wt |
|---|---|---|---|---|---|
| 3 | 20 | 60.25 | 39.5 | 0.256 | D3.5 |
| 4 | 23 | 61 | 38.875 | 0.24 | D3.5 |
| 5 | 26 | 61.75 | 38.25 | 0.224 | D3.5 |
| 6 | 29 | 62.5 | 37.625 | 0.209 | D3.5 |
| 7 | 33 | 63 | 37 | 0.181 | D3.5 |
| 8 | 37 | 63.5 | 36.5 | 0.157 | D3.5 |
| 9 | 41 | 64 | 36 | 0.134 | D3.5 |
| PW | 46 | 64.5 | 35.5 | 0.11 | D3.5 |
| AW | 51 | 64.5 | 35.5 | 0.087 | D3.5 |
| SW | 56 | 64.5 | 35.25 | 0.063 | D5 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
Shop TaylorMade Burner SuperLaunch
Compare prices for new and used sets on eBay:
We may earn a commission from purchases made through links on this page at no extra cost to you.
Loft progression
About the TaylorMade Burner SuperLaunch
The Burner SuperLaunch was TaylorMade's maximum-forgiveness iron of 2010-2011, sold alongside the Burner 2.0 rather than replacing it and marketed as the company's highest-MOI iron to that point. It uses an ultra-large deep cavity, a low-profile long-iron head, an extra-wide multi-functional sole and Inverted Cone Technology, and it was one of the first TaylorMade irons built with the 2010 conforming groove design. Lofts sit a degree weaker than the concurrent Burner 2.0, with a 33-degree 7-iron and a 46-degree pitching wedge, and the set tops out at a sand wedge. Specs below are the men's standard steel-shaft build.
Stock shafts
- TaylorMade Burner SuperFast 85 — steel · 85 g · flexes: R, S
- TaylorMade RE*AX SuperFast 60 — graphite · 60 g
- TaylorMade RE*AX SuperFast 50-L — graphite · 50 g
Related models
Frequently asked questions
What is the loft of a TaylorMade Burner SuperLaunch 7-iron?
The TaylorMade Burner SuperLaunch 7-iron has a loft of 33 degrees, with a 63-degree lie and a 37-inch steel-shaft length.
How do the Burner SuperLaunch lofts compare to the Burner 2.0?
The SuperLaunch is 2 degrees weaker at the 7-iron (33 degrees versus 31) and 1 degree weaker at the pitching wedge (46 versus 45). The SuperLaunch was built for higher launch and easier carry rather than for maximum distance.
Is there a Burner SuperFast iron set?
No. SuperFast was a TaylorMade driver, fairway wood and rescue name. The SuperFast branding appears on this iron only as the shaft designation, the Burner SuperFast 85 steel shaft fitted to the Burner SuperLaunch irons.
Finding a used set
The TaylorMade Burner SuperLaunch ran from 2010 to 2011 and is no longer in production, so the used market is the only source. Search the used listings on eBay, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- TaylorMade official Burner SuperLaunch Irons sell sheet (BURNER SUPERLAUNCH IRONS specifications table: loft, lie, offset in mm, steel length, steel swingweight, shafts), taylormadegolf.com/docs/productspecs/Burner_SuperLaunch_Irons_SS.pdf
- 2011 TaylorMade Irons catalog p.17, Burner SuperLaunch page (corroborating loft/lie/offset/length row), taylormadegolf.com/docs/productspecs/Burner_Superlaunch.pdf
Last updated 22 July 2026. Spot an error? info@loftchart.com