Titleist DCI 822 OS Irons Specifications

Full factory loft, lie and length chart for the Titleist DCI 822 OS irons, 2001–2003.

Years produced
2001–2003
Category
Super Game Improvement Irons
Construction
investment cast, oversize dual cavity
Material
17-4 stainless steel
Set makeup
1–SW

Loft, lie & length chart

Standard men's steel-shaft specifications for the Titleist DCI 822 OS irons.
ClubLoft (°)Lie (°)Length (in)Offset (in)BounceSwing wt
11658400.326D1
218.55939.50.37D1
32160390.287.5D1
423.56138.50.268D1
526.562380.249D1
629.562.537.50.2210D1
733.563370.20510.5D1
837.563.536.50.1911D1
941.564360.17512D1
PW466435.750.1612D1
W506435.50.14512D1
SW55.56435.50.0912D3

Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.

Shop Titleist DCI 822 OS

Compare prices for new and used sets on eBay:

We may earn a commission from purchases made through links on this page at no extra cost to you.

Loft progression

Titleist DCI 822 OS loft by clubColumn chart of loft in degrees for each club in the set: 1 16, 2 18.5, 3 21, 4 23.5, 5 26.5, 6 29.5, 7 33.5, 8 37.5, 9 41.5, PW 46, W 50, SW 55.5.0°10°20°30°40°50°60°1: 16°161+2.52: 18.5°18.52+2.53: 21°213+2.54: 23.5°23.54+35: 26.5°26.55+36: 29.5°29.56+47: 33.5°33.57+48: 37.5°37.58+49: 41.5°41.59+4.5PW: 46°46PW+4W: 50°50W+5.5SW: 55.5°55.5SWClubGapLoft
Loft for each club, 1 to SW. The Gap row is the loft added from one club to the next; gaps run from 2.5° to 5.5°.
Titleist DCI 822 OS 7-iron loft angleSide view of the club face tilted 33.5 degrees back from vertical, the loft of the 7-iron.33.5°VerticalFaceTarget
The 7-iron face, drawn at its 33.5° loft from the chart. Head shape is schematic, not to scale.

About the Titleist DCI 822 OS

The DCI 822 OS is the oversize, maximum-forgiveness member of the 2001 DCI range and the most offset-heavy iron Titleist has catalogued: .320 inches at the 1-iron, still .175 inches at the 9-iron. Lofts are the strongest in the DCI family, with a 33.5 degree 7-iron, and the set is built with markedly more bounce than its stablemates, from 6 degrees at the 1-iron to 12 degrees through the scoring clubs, so it resists digging out of soft turf. It sits alongside the DCI 762 in the range as the higher-launch, wider-soled option.

Stock shafts

Related models

Frequently asked questions

What is the loft of a Titleist DCI 822 OS 7-iron?

The Titleist DCI 822 OS 7-iron is 33.5 degrees, with a 63 degree lie and a 37 inch standard steel length.

How does the DCI 822 OS differ from the DCI 762?

The 822 OS is the oversize model: it is half a degree to one degree stronger through the set, carries far more offset at .205 inches at the 7-iron against .109 inches, and has roughly twice the bounce.

What is the pitching wedge loft on the Titleist DCI 822 OS?

The DCI 822 OS pitching wedge is 46 degrees, with a 50 degree gap wedge and a 55.5 degree sand wedge completing the stock set.

Finding a used set

The Titleist DCI 822 OS ran from 2001 to 2003 and is no longer in production, so the used market is the only source. Search the used listings on eBay, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.

Data compiled from:
  • Titleist previous-models archived product page, titleist.com/golf-clubs/irons/dci-8220s, via the Internet Archive (full manufacturer table: length, loft, lie, offset, swing weight, bounce)

Last updated 22 July 2026. Spot an error? info@loftchart.com