XXIO 9 Irons Specifications

Full factory loft, lie and length chart for the XXIO 9 irons, 2015–2017.

Years produced
2015–2017
Category
Super Game Improvement Irons
Construction
lost-wax cast body with a milled titanium face insert; five-piece head in the long and mid irons
Material
Super-TIX PLUS titanium face on a SUS630 stainless body with tungsten-nickel weighting
Set makeup
4–SW

Loft, lie & length chart

Standard men's steel-shaft specifications for the XXIO 9 irons.
ClubLoft (°)Lie (°)Length (in)Bounce
42260.538.51
52461381
62761.537.51
73062372
83462.536.53
93963364
PW4463.535.55
AW5063.535.56
SW5663.535.512

Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.

About the XXIO 9

XXIO 9 is the ninth generation of Dunlop's lightweight flagship, announced in late 2015 and sold in the US through 2016 and 2017 as the 2016 line. The 4- through 7-irons use a five-piece head — Super-TIX PLUS titanium milled face insert, SUS630 stainless body and tungsten-nickel weights in the sole, toe, heel and neck — which XXIO claimed gave the lowest centre of gravity in the line's history, while the short irons simplify to fewer pieces. The matching Dual Speed Technology build pairs the heavier head with the MP900 graphite shaft, whose balance point sits 15mm closer to the grip than the MP800 it replaced. Lofts are traditional for the category — a 30-degree 7-iron and 44-degree pitching wedge — and XXIO publishes face progression (1mm at the 4-iron to 5.5mm at the wedges) rather than offset. The stock set was 6-PW with 4, 5, AW and SW singles.

Stock shafts

Related models

Frequently asked questions

What is the loft of an XXIO 9 7-iron?

The XXIO 9 7-iron has a loft of 30 degrees, a lie of 62.0 degrees and a length of 37.0 inches.

What shafts did the XXIO 9 irons come with?

The stock graphite shaft was the XXIO MP900 in R, SR and S flexes, with the Nippon N.S. Pro 890GH DST for XXIO as the steel option in R and S.

What is the XXIO 9 head made of?

The 4- through 7-irons use a five-piece head with a milled Super-TIX PLUS titanium face insert on a SUS630 stainless steel body, plus tungsten-nickel weights in the sole, toe, heel and neck. The short irons use a simpler construction.

When did the XXIO 9 irons come out?

The XXIO 9 series was announced in late 2015, reached Japanese retail in December 2015 and US retail in January 2016, and was replaced by the XXIO 10 announced in late 2017.

Finding a used set

The XXIO 9 ran from 2015 to 2017 and is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.

Data compiled from:
  • xxiousa.com/products/xxio9 official XXIO 9 series page, archive.org snapshot of 27 November 2015 — the manufacturer iron specification table giving loft, lie, bounce, face progression and club length for the 4-iron through sand wedge, the five-piece #4-7 head construction (Super-TIX PLUS titanium milled face insert, SUS630 body, tungsten-nickel sole/toe/heel/neck weights), the MP900 graphite (S/SR/R, 54-57g) and N.S. Pro 890GH DST for XXIO steel (S/R, 87-91g) shaft tables, and the 6-PW five-club stock set with 4, 5, AW and SW singles.
  • Year note: the series page was live on the US site by November 2015 with US retail from January 2016, so the set is often dated 2016; year_introduced records the 2015 announcement per the schema convention.
  • Swing weights are omitted because the official chart lists them per flex band (graphite C9-D1, steel D1-D3) rather than per club. Face progression is noted above in place of offset, which XXIO does not publish.

Last reviewed 2026-07-29. Spot an error? [email protected]