Ben Hogan Ft. Worth 15 Irons Specifications

Full factory loft, lie and length chart for the Ben Hogan Ft. Worth 15 irons, 2015–2017.

Years produced: 2015–2017
Category: Blade / Muscleback
Construction: forged
Material: 1025 carbon steel
Set makeup: 20–44

Loft, lie & length chart

Standard men's steel-shaft specifications for the Ben Hogan Ft. Worth 15 irons.
Club	Loft (°)	Lie (°)	Length (in)
20	20	60	39
24	24	61	38.25
28	28	62	37.5
32	32	62.5	37
36	36	63	36.5
40	40	63.5	36
44	44	64	35.75

Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.

About the Ben Hogan Ft. Worth 15

The Ft. Worth 15 was the first iron released by the relaunched Ben Hogan Golf Equipment Company and is a compact, progressively weighted forged blade. Its defining quirk is that it is not numbered: every head is stamped with its actual loft, and Ben Hogan built heads in every loft from 20 to 47 degrees. A stock set is seven clubs in 4-degree loft gaps, chosen from one of four launch profiles - low 20/24/28/32/36/40/44, mid 21/25/29/33/37/41/45, mid-high 22/26/30/34/38/42/46, or high 23/27/31/35/39/43/47. The rows below use the low-launch profile; length, lie and swing weight are set by the loft band, so the 24-27 degree band is always 38.25 inches and 61 degrees regardless of which profile you order. The set was replaced in the line-up by the Ft. Worth Black and Ft. Worth White irons.

Stock shafts

KBS Tour V — steel · flexes: S, X
KBS Tour 90 — steel · flexes: R, S
True Temper Dynamic Gold — steel · flexes: R, S, X
UST Recoil — graphite · flexes: A, R, S

Related models

Frequently asked questions

Why are Ben Hogan Ft. Worth 15 irons stamped with a number like 32 instead of a 7-iron?

The relaunched Ben Hogan Golf Equipment Company marked each Ft. Worth 15 head with its actual loft in degrees instead of a club number. Heads were made in every loft from 20 to 47 degrees, and a set is seven of them in 4-degree gaps. A 32-degree Ft. Worth 15 is the club that sits where a 7-iron would in a conventional set.

What is the loft of the middle iron in a Ben Hogan Ft. Worth 15 set?

In the low-launch profile the fourth club of the seven is stamped 32, so its loft is 32 degrees, with a 62.5-degree lie and a 37.00-inch steel length. The equivalent club is 33 degrees in the mid profile, 34 degrees in the mid-high profile and 35 degrees in the high profile.

What clubs are in a stock Ben Hogan Ft. Worth 15 set?

Seven clubs spanning 20 to 47 degrees in 4-degree gaps, ordered as one of four launch profiles. That is roughly the equivalent of a 4-iron through pitching wedge, though no head carries a club number.

Finding a used set

The Ben Hogan Ft. Worth 15 is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.

Data compiled from:

Ben Hogan Golf official Ft. Worth 15 spec chart image, retrieved from http://web.archive.org/web/20160319192525/http://www.benhogangolf.com/mas_assets/theme/ben_hogan/images/content/FtWorth15_SpecChart.png - gives length, lie, swing weight and V-Sole bounce for each 4-degree loft band (20-23 through 44-47)
Ben Hogan Golf official FT. WORTH irons product page, retrieved from http://web.archive.org/web/2016/http://www.benhogangolf.com/Ft-Worth-15 - states heads are marked with actual loft rather than a club number, are crafted in every loft from 20 to 47 degrees, and are offered in four launch profiles
Background on the 2015 relaunch and on Callaway retaining the Apex trademark comes from MyGolfSpy and GolfWRX coverage seen in search results; those article bodies were not retrieved directly

Last reviewed 2026-07-22. Spot an error? [email protected]