Ben Hogan Radial Irons Specifications
Full factory loft, lie and length chart for the Ben Hogan Radial irons, 1987–1990.
- Years produced
- 1987–1990
- Category
- Game Improvement Irons
- Construction
- forged, wide radial sole
- Material
- forged carbon steel
- Set makeup
- 2–PW
Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) |
|---|---|---|---|
| 2 | 19.5 | 57 | 39.25 |
| 3 | 23 | 58 | 39 |
| 4 | 26.5 | 59 | 38.5 |
| 5 | 30 | 60 | 38 |
| 6 | 33.5 | 61 | 37.5 |
| 7 | 37 | 62 | 37 |
| 8 | 41 | 63 | 36.5 |
| 9 | 45 | 63.5 | 36 |
| PW | 50 | 64 | 35.5 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
Shop Ben Hogan Radial
Compare prices for new and used sets on eBay:
We may earn a commission from purchases made through links on this page at no extra cost to you.
Loft progression
About the Ben Hogan Radial
The Radial was Hogan's attempt to reach mid-to-high handicap golfers with a forged iron, built around a wide, radiused sole shaped to resist digging and to keep the center of gravity low and back for an easy, forgiving ball flight — "an extremely easy to hit forging" that vintage-club reviewers still rate among the most playable Hogan ever made. This forged 1987 generation followed the original 1983 Radial, which used the same radial-sole concept in a cast head; Hogan collectors catalog the two as distinct, consecutive spec sheets ("1983 Radial Cast" and "1987 Radial Forged"). At roughly $1,000 a set in 1983 dollars, the Radial concept was expensive for the category, and it never dislodged Hogan's reputation as a players-only brand in the mid-handicap market it targeted. Lofts are moderate for a forgiveness-oriented iron of the era (37-degree 7-iron, 50-degree Equalizer), sold as a 2-iron through Equalizer set. Hogan's letter wedge is recorded here as PW (Equalizer, 50°).
Stock shafts
- Ben Hogan Apex — steel
Related models
Frequently asked questions
What is the loft of a Ben Hogan Radial 7-iron?
The Ben Hogan Radial 7-iron has a loft of 37 degrees, with a 62-degree lie and a 37-inch length.
What made the Ben Hogan Radial different from other Hogan irons of its era?
A wide, radiused sole designed to resist digging and keep the center of gravity low and back, aimed at making the club easier to hit for mid-to-high handicap players — a clear departure from Hogan's usual players-first forged blades.
Was the Ben Hogan Radial forged or cast?
Both existed: the original 1983 Radial used a cast head, and this 1987 generation carried the same wide radial-sole concept into a forged head.
What clubs came in a stock Ben Hogan Radial set?
It was sold as a 2-iron through Equalizer (pitching wedge) set on a stock Ben Hogan Apex steel shaft.
Finding a used set
The Ben Hogan Radial ran from 1987 to 1990 and is no longer in production, so the used market is the only source. Search the used listings on eBay, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- qsponge.com 'What is loft angle of Ben Hogan Radial Irons?' — full 2-PW factory-derived table: lofts 19.5/23/26.5/30/33.5/37/41/45/50 degrees, lies 57-64 degrees, lengths 39.25 to 35.5 inches
- GolfWRX forum thread 'Hogan Iron Spec Sheet' (Chuck_22046, 31 October 2014) — the collector-compiled Hogan model index lists '1983 Radial Cast' and '1987 Radial Forged' as two separate, both-'Complete' spec entries, distinguishing the original cast Radial from this later forged generation and fixing the forged version's year at 1987; a separate qsponge.com page for 'Ben Hogan Radial Cast Irons' gives a near-identical but not-quite-matching table (lengths a half inch shorter throughout), corroborating that the 'Radial Irons' table used here is the forged, non-cast version
- thehackersparadise/torontogolfnuts and drivingrangeheroes.com forum/blog commentary on the 1983-87 Radial — 'an extremely easy to hit forging with a wide sole... a radical departure for Hogan forged irons,' aimed at the mid-to-high-handicap market at a roughly $1,000 price point, and 'the Hogan Company made Radials before the Edges came out' (the Edge succeeded it in 1988/1990)
- Deviation from the initial gap-analysis brief: year_introduced is recorded as 1987 (the forged Radial), not the cast original's 1983, per the GolfWRX collector index's explicit 'Radial Forged'/'Radial Cast' split; this matches the brief's stated 1987 more closely than the 1983 cast original would
Last updated 29 July 2026. Spot an error? info@loftchart.com