Callaway Rogue Irons Specifications
Full factory loft, lie and length chart for the Callaway Rogue irons, from 2018.
- Years produced
- from 2018
- Category
- Game Improvement Irons
- Construction
- investment cast, multi-material
- Material
- cast stainless steel with a 360 Face Cup, tungsten weighting and urethane microspheres
- Set makeup
- 3–LW
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) | Swing wt |
|---|---|---|---|---|---|
| 3 | 18 | 59.8 | 39.5 | 0.27 | D2 |
| 4 | 20.5 | 60.5 | 38.875 | 0.26 | D2 |
| 5 | 23 | 61.3 | 38.25 | 0.25 | D2 |
| 6 | 26 | 62 | 37.625 | 0.24 | D2 |
| 7 | 30 | 62.5 | 37 | 0.23 | D2 |
| 8 | 34.5 | 63 | 36.5 | 0.22 | D2 |
| 9 | 39 | 63.5 | 36 | 0.21 | D2 |
| PW | 44 | 64 | 35.75 | 0.2 | D2 |
| AW | 49 | 64 | 35.5 | 0.175 | D2 |
| SW | 54 | 64 | 35.25 | 0.15 | D2 |
| LW | 59 | 64 | 35 | 0.125 | D2 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Callaway Rogue
Released in February 2018, the Rogue was Callaway's mainstream game-improvement iron between the Steelhead XR and the Mavrik. It pairs a 360 Face Cup with Variable Face Thickness so the face flexes across a wider area, adds tungsten weighting to lower the centre of gravity, and fills the head with elastic urethane microspheres to absorb vibration without restricting face speed. Note that the Rogue predates Callaway's artificial-intelligence face design, which reached the iron line with the Mavrik in 2020. The published set is unusually deep, running from a 3-iron to a lob wedge. Specs below are the standard men's steel-shaft numbers.
Stock shafts
- True Temper XP 95 — steel
- Aldila Synergy 60 — graphite
Related models
Frequently asked questions
What is the loft of a Callaway Rogue 7-iron?
The Callaway Rogue 7-iron has a loft of 30 degrees, with a 62.5 degree lie and a 37 inch standard steel length.
What is the loft of a Callaway Rogue pitching wedge?
The Callaway Rogue pitching wedge is 44 degrees, with a 49 degree A-wedge, a 54 degree sand wedge and a 59 degree lob wedge.
Do the Callaway Rogue irons have an A.I.-designed face?
No. The 2018 Rogue uses a 360 Face Cup with Variable Face Thickness. Callaway's artificial-intelligence face design first appeared in the Epic Flash driver in 2019 and did not reach the iron line until the Mavrik in 2020.
How long is a standard Callaway Rogue 7-iron?
The standard men's steel-shaft Callaway Rogue 7-iron is 37 inches with a 62.5 degree lie angle.
Finding a used set
The Callaway Rogue is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- Callaway Golf Pre-Owned Rogue product specs (callawaygolfpreowned.com/iron-sets/irons-2018-rogue.html) — loft, lie, length and swingweight, plus the 360 Face Cup, VFT, tungsten and urethane microsphere construction
- 2nd Swing Golf Callaway Rogue iron set spec table (2ndswing.com/golf-clubs/iron-sets/callaway-rogue-iron-set) — independently matches on every loft, lie and length
- Golf.com and MyGolfSpy Rogue iron coverage (February 2018 release) — True Temper XP 95 steel and Aldila Synergy 60 graphite stock shafts
- Offset ladder added from the Callaway Demandware ProductSpecs feed (ProductSpecs-Get), the manufacturer-authored source behind the View Specs panel, published natively in decimal inches
Last reviewed 2026-07-22. Spot an error? [email protected]