Callaway X-18 Irons Specifications
Full factory loft, lie and length chart for the Callaway X-18 irons, 2004–2007.
- Years produced
- 2004–2007
- Category
- Game Improvement Irons
- Construction
- investment cast
- Material
- stainless steel
- Set makeup
- 2–LW
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Swing wt |
|---|---|---|---|---|
| 2 | 18 | 59.2 | 39.5 | D2 |
| 3 | 21 | 59.9 | 39 | D2 |
| 4 | 23.5 | 60.6 | 38.5 | D2 |
| 5 | 26 | 61.3 | 38 | D2 |
| 6 | 29 | 62 | 37.5 | D2 |
| 7 | 33 | 62.5 | 37 | D2 |
| 8 | 37 | 63.5 | 36.5 | D2 |
| 9 | 41 | 64.5 | 36 | D2 |
| PW | 46 | 65 | 35.5 | D2 |
| AW | 51 | 65 | 35.5 | D2 |
| SW | 56 | 65 | 35.25 | D4 |
| LW | 60 | 65 | 35 | D4 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Callaway X-18
The X-18 replaced the X-16 in 2004 and moved the line back toward slightly weaker lofts, with a 33 degree 7-iron against the X-16's 34 and a 41 degree 9-iron against 42. It keeps the upright Callaway lie ladder topping out at 65 degrees through the wedges and the notched, undercut cavity that defined the mid-2000s X-series. Callaway listed the stock steel build as Constant Weight Uniflex Steel, and published no bounce column for this generation. The catalogued range ran 2-iron to lob wedge.
Related models
Frequently asked questions
What is the loft of a Callaway X-18 7-iron?
The Callaway X-18 7-iron is 33 degrees, with a 62.5 degree lie and a 37 inch standard steel length.
Is the Callaway X-18 stronger or weaker than the X-16?
Weaker through the middle and short irons. The X-18 7-iron is 33 degrees against 34 on the X-16, and its 9-iron is 41 degrees against 42.
What is the pitching wedge loft on the Callaway X-18?
The X-18 pitching wedge is 46 degrees, with a 51 degree approach wedge, a 56 degree sand wedge and a 60 degree lob wedge.
Finding a used set
The Callaway X-18 ran from 2004 to 2007 and is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- Archived callawaygolf.com Classic Clubs specification sheet, en.cg.ClassicClubs.X18Irons.specs-1.html, via the Internet Archive (loft, lie, length, swing weight)
- Archived callawaygolf.com product specification page, en.CLUBS.Irons.X18.specs-1.html, via the Internet Archive - agreeing cell for cell
- Callaway Demandware ProductSpecs feed (ProductSpecs-Get), the manufacturer-authored source behind the View Specs panel on callawaygolf.com and callawaygolfpreowned.com, product code irons-bb-x18 - third Callaway surface, identical
- Callaway published no bounce column for the X-18, so the column is omitted rather than estimated
- Offset was not published for this model in any Callaway source located, so the column is omitted rather than estimated
Last reviewed 2026-09-05. Spot an error? info@loftchart.com