Cobra KING Forged Tec X vs Cobra KING TEC X (2024)
Side-by-side factory specifications. Differing values are highlighted.
Specification comparison
| Club | KING Forged Tec X loft | KING TEC X (2024) loft | KING Forged Tec X lie | KING TEC X (2024) lie | KING Forged Tec X length | KING TEC X (2024) length |
|---|---|---|---|---|---|---|
| 4 | 19 | 19 | 62 | 62 | 38.75 | 38.75 |
| 5 | 21 | 21 | 62.5 | 62.5 | 38.25 | 38.25 |
| 6 | 24 | 24 | 63 | 63 | 37.75 | 37.75 |
| 7 | 27 | 27 | 63.5 | 63.5 | 37.25 | 37.25 |
| 8 | 31.5 | 31.5 | 64 | 64 | 36.75 | 36.75 |
| 9 | 36.5 | 36.5 | 64.5 | 64.5 | 36.25 | 36.25 |
| PW | 42 | 42 | 65 | 65 | 36 | 36 |
| GW | 48 | 48 | 65 | 65 | 35.75 | 35.75 |
Highlighted cells differ between the two sets. Lofts and lies are factory standard.
Lofts compared
- KING Forged Tec X
- KING TEC X (2024)
What the differences mean
Every club the two sets share has exactly the same loft, starting with a 27° 7-iron. On paper there is no distance or trajectory difference: with the same swing, a 7-iron from either set should launch and carry about the same. The real differences are in how the heads are built, how they look at address and how they feel at impact, none of which a spec table can show. Lie angles and lengths match as well, so any fitting adjustment made to one set would carry straight over to the other.
Both are players distance irons, built for roughly 5 to 15 handicaps who want extra distance from a compact head. Forged or multi-material heads that keep a compact look while adding face technology and stronger lofts for distance. Because they target the same golfer, the decision comes down to the specific loft, feel and shaping differences rather than who the sets are made for.
The KING Forged Tec X is listed as forged hollow body with a PWRSHELL face, foam-filled, tungsten weighted and the KING TEC X (2024) as hollow body with an internal tungsten weight. Both use hollow-body heads, so both trade a little feel for face flex and launch help. Both use tungsten weighting to lower the centre of gravity and steady the head on off-centre strikes.
The KING TEC X (2024) arrived 2 years after the KING Forged Tec X, a typical one-generation refresh. Changes over that span are usually incremental: refined face thickness, revised weighting, updated looks and small loft tweaks rather than a new concept.
Which should you choose?
The KING Forged Tec X and KING TEC X (2024) share the same lofts on every club on file, so the difference is in head construction, feel and forgiveness rather than trajectory.
Both charts are reproduced in full on their own pages: Cobra KING Forged Tec X specs and Cobra KING TEC X (2024) specs.
Frequently asked questions
Is the Cobra KING Forged Tec X stronger lofted than the KING TEC X (2024)?
No. Both have a 27° 7-iron and the same loft on every club they share, so neither is stronger lofted. The difference is in construction and feel.
What is the loft difference between the Cobra KING Forged Tec X and KING TEC X (2024)?
There is none. Every club both sets include has the same loft, including the 27° 7-iron.
Are the Cobra KING Forged Tec X and KING TEC X (2024) aimed at the same golfer?
Yes. Both are players distance irons, built for roughly 5 to 15 handicaps who want extra distance from a compact head. Choose on feel, looks and gapping, ideally after hitting both.
Do the Cobra KING Forged Tec X and KING TEC X (2024) have the same lie and length?
At the 7-iron, yes: both are 63.5° lie and 37.25 inches long.
Shop both models
Compare prices for new and used sets on eBay:
We may earn a commission from purchases made through links on this page at no extra cost to you.