Cobra KING TEC X (2024) vs Cobra KING (2026)
Side-by-side factory specifications. Differing values are highlighted.
Specification comparison
| Club | KING TEC X (2024) loft | KING (2026) loft | KING TEC X (2024) lie | KING (2026) lie | KING TEC X (2024) length | KING (2026) length |
|---|---|---|---|---|---|---|
| 4 | 19 | 19 | 62 | 62 | 38.75 | 39.25 |
| 5 | 21 | 21.5 | 62.5 | 62.5 | 38.25 | 38.5 |
| 6 | 24 | 24.5 | 63 | 63 | 37.75 | 37.75 |
| 7 | 27 | 27.5 | 63.5 | 63.5 | 37.25 | 37.25 |
| 8 | 31.5 | 32 | 64 | 64 | 36.75 | 36.75 |
| 9 | 36.5 | 37 | 64.5 | 64.5 | 36.25 | 36.25 |
| PW | 42 | 42.5 | 65 | 65 | 36 | 36 |
| GW | 48 | 48 | 65 | 65 | 35.75 | 35.75 |
| SW | — | 54 | — | 65 | — | 35.5 |
Highlighted cells differ between the two sets. Lofts and lies are factory standard.
Lofts compared
- KING TEC X (2024)
- KING (2026)
What the differences mean
At the 7-iron, the KING TEC X (2024) is 27° and the KING (2026) is 27.5°, a 0.5° gap. Each degree of loft is worth roughly 3 to 4 yards of carry at the same swing speed, so the KING TEC X (2024) should carry about 2 yards further with that club, on a slightly lower, shallower flight than the KING (2026). Across the 8 clubs both sets share, the KING (2026) averages 0.4° weaker, with the largest gap at the 5-iron (21° vs 21.5°). The pitching wedges are 42° and 42.5°; the stronger one leaves a 8° jump to a 50° gap wedge, which matters when planning wedge gapping.
The sets are built differently: the KING TEC X (2024) runs 4-iron to GW (8 clubs), the KING (2026) 4-iron to SW (9 clubs).
The KING TEC X (2024) is a players distance iron and the KING (2026) a game improvement iron, so they sit one step apart on the forgiveness scale. The KING (2026) is the more forgiving design, with a wider sole, more offset and more perimeter weighting for roughly 10 to 25 handicaps. The KING TEC X (2024) trades some of that for a more compact head, thinner topline and more control over flight and shape, which suits roughly 5 to 15 handicaps who want extra distance from a compact head.
The KING TEC X (2024) is listed as hollow body with an internal tungsten weight and the KING (2026) as multi-piece distance iron with a 360 SPEEDSHELL face insert, a polymer-encased internal weight and a 3D-printed medallion. The KING TEC X (2024)'s hollow body lets the face flex more and moves mass low and outward, usually giving higher launch and more ball speed on off-centre strikes than the KING (2026), at some cost in feel. The KING TEC X (2024) adds tungsten weighting, which lowers the centre of gravity and raises stability on mis-hits, helping the long irons launch.
The KING (2026) came out 2 years after the KING TEC X (2024), but it is a different line rather than a direct replacement, so the two were designed for different golfers as well as different seasons.
Which should you choose?
The KING (2026) is the weaker-lofted set — up to 0.5° weaker than the KING TEC X (2024). That trades raw distance for a steeper landing angle and more predictable stopping power into greens.
Both charts are reproduced in full on their own pages: Cobra KING TEC X (2024) specs and Cobra KING (2026) specs.
Frequently asked questions
Is the Cobra KING TEC X (2024) stronger lofted than the KING (2026)?
Yes. The Cobra KING TEC X (2024) 7-iron is 27° against 27.5° for the KING (2026), 0.5° stronger, which is worth about 2 yards of extra carry with the same swing.
What is the loft difference between the Cobra KING TEC X (2024) and KING (2026)?
At the 7-iron the difference is 0.5° (27° vs 27.5°). The largest gap on a shared club is 0.5° at the 5-iron, and 6 of the 8 shared clubs differ.
Which is better for higher handicap golfers, the Cobra KING TEC X (2024) or the KING (2026)?
The KING (2026). As a game improvement iron it is the more forgiving design, suited to roughly 10 to 25 handicaps. The Cobra KING TEC X (2024) is a players distance iron, better suited to roughly 5 to 15 handicaps who want extra distance from a compact head.
Do the Cobra KING TEC X (2024) and KING (2026) have the same lie and length?
At the 7-iron, yes: both are 63.5° lie and 37.25 inches long.
Shop both models
Compare prices for new and used sets on eBay:
We may earn a commission from purchases made through links on this page at no extra cost to you.