Honma TW747 P vs Honma TW747 Vx
Side-by-side factory specifications. Differing values are highlighted.
Specification comparison
| Club | TW747 P loft | TW747 Vx loft | TW747 P lie | TW747 Vx lie | TW747 P length | TW747 Vx length |
|---|---|---|---|---|---|---|
| 3 | — | 19 | — | 59.5 | — | 39 |
| 4 | 19 | 21 | 60 | 60 | 38.5 | 38.5 |
| 5 | 21.5 | 24 | 60.5 | 60.5 | 38 | 38 |
| 6 | 25 | 27 | 61 | 61 | 37.5 | 37.5 |
| 7 | 28.5 | 30 | 61.5 | 61.5 | 37 | 37 |
| 8 | 33 | 34 | 62 | 62 | 36.5 | 36.5 |
| 9 | 38 | 38 | 62.5 | 62.5 | 36 | 36 |
| 10 | — | 43 | — | 63 | — | 35.5 |
| PW | 43.5 | — | 63 | — | 35.5 | — |
| GW | 48 | — | 63 | — | 35 | — |
| SW | 56 | — | 63.5 | — | 35 | — |
Highlighted cells differ between the two sets. Lofts and lies are factory standard.
Lofts compared
- TW747 P
- TW747 Vx
What the differences mean
At the 7-iron, the TW747 P is 28.5° and the TW747 Vx is 30°, a 1.5° gap. Each degree of loft is worth roughly 3 to 4 yards of carry at the same swing speed, so the TW747 P should carry roughly 4 to 6 yards further with that club, on a slightly lower, shallower flight than the TW747 Vx. Across the 6 clubs both sets share, the TW747 Vx averages 1.5° weaker, with the largest gap at the 5-iron (21.5° vs 24°).
The sets are built differently: the TW747 P runs 4-iron to SW (9 clubs), the TW747 Vx 3-iron to 10-iron (8 clubs).
The TW747 P is a players distance iron and the TW747 Vx a players iron, so they sit one step apart on the forgiveness scale. The TW747 P is the more forgiving design, with a wider sole, more offset and more perimeter weighting for roughly 5 to 15 handicaps who want extra distance from a compact head. The TW747 Vx trades some of that for a more compact head, thinner topline and more control over flight and shape, which suits roughly scratch to 10 handicaps.
The TW747 P is listed as cast pocket cavity with tungsten sole weighting and the TW747 Vx as forged. Forging, as in the TW747 Vx, is generally credited with a softer feel; casting, as in the TW747 P, allows more complex cavity and weighting shapes, which is why it dominates forgiving irons. The TW747 P adds tungsten weighting, which lowers the centre of gravity and raises stability on mis-hits, helping the long irons launch.
Both sets were introduced in 2018, so this is a choice between two models from the same lineup rather than an upgrade: Honma designed them to sit side by side for different players.
Which should you choose?
The TW747 Vx is the weaker-lofted set — up to 2.5° weaker than the TW747 P. That trades raw distance for a steeper landing angle and more predictable stopping power into greens.
Both charts are reproduced in full on their own pages: Honma TW747 P specs and Honma TW747 Vx specs.
Frequently asked questions
Is the Honma TW747 P stronger lofted than the TW747 Vx?
Yes. The Honma TW747 P 7-iron is 28.5° against 30° for the TW747 Vx, 1.5° stronger, which is worth roughly 4 to 6 yards of extra carry with the same swing.
What is the loft difference between the Honma TW747 P and TW747 Vx?
At the 7-iron the difference is 1.5° (28.5° vs 30°). The largest gap on a shared club is 2.5° at the 5-iron, and 5 of the 6 shared clubs differ.
Which is better for higher handicap golfers, the Honma TW747 P or the TW747 Vx?
The Honma TW747 P. As a players distance iron it is the more forgiving design, suited to roughly 5 to 15 handicaps who want extra distance from a compact head. The TW747 Vx is a players iron, better suited to roughly scratch to 10 handicaps.
Do the Honma TW747 P and TW747 Vx have the same lie and length?
At the 7-iron, yes: both are 61.5° lie and 37 inches long.
Shop both models
Compare prices for new and used sets on eBay:
We may earn a commission from purchases made through links on this page at no extra cost to you.