Honma TW757 P vs Honma TW757 Vx
Side-by-side factory specifications. Differing values are highlighted.
Specification comparison
| Club | TW757 P loft | TW757 Vx loft | TW757 P lie | TW757 Vx lie | TW757 P length | TW757 Vx length |
|---|---|---|---|---|---|---|
| 4 | 19 | 21 | 60 | 60 | 38.75 | 38.625 |
| 5 | 21.5 | 24 | 60.5 | 60.5 | 38.25 | 38.125 |
| 6 | 25 | 27 | 61 | 61 | 37.75 | 37.625 |
| 7 | 28.5 | 30 | 61.5 | 61.5 | 37.25 | 37.125 |
| 8 | 33 | 34 | 62 | 62 | 36.75 | 36.625 |
| 9 | 38 | 38 | 62.5 | 62.5 | 36.25 | 36.125 |
| PW | 43.5 | 43 | 63 | 63 | 35.75 | 35.625 |
Highlighted cells differ between the two sets. Lofts and lies are factory standard.
Lofts compared
- TW757 P
- TW757 Vx
What the differences mean
At the 7-iron, the TW757 P is 28.5° and the TW757 Vx is 30°, a 1.5° gap. Each degree of loft is worth roughly 3 to 4 yards of carry at the same swing speed, so the TW757 P should carry roughly 4 to 6 yards further with that club, on a slightly lower, shallower flight than the TW757 Vx. Across the 7 clubs both sets share, the TW757 Vx averages 1.2° weaker, with the largest gap at the 5-iron (21.5° vs 24°). The pitching wedges are 43.5° and 43°; the stronger one leaves a 7° jump to a 50° gap wedge, which matters when planning wedge gapping. Beyond loft, the TW757 P 7-iron is 0.12 inches longer (37.25" vs 37.125").
The TW757 P is a players distance iron and the TW757 Vx a players iron, so they sit one step apart on the forgiveness scale. The TW757 P is the more forgiving design, with a wider sole, more offset and more perimeter weighting for roughly 5 to 15 handicaps who want extra distance from a compact head. The TW757 Vx trades some of that for a more compact head, thinner topline and more control over flight and shape, which suits roughly scratch to 10 handicaps.
The TW757 P is listed as cast hollow body with an L-cup face and the TW757 Vx as one-piece forged cavity back with a tungsten toe weight. Forging, as in the TW757 Vx, is generally credited with a softer feel; casting, as in the TW757 P, allows more complex cavity and weighting shapes, which is why it dominates forgiving irons. The TW757 P's hollow body lets the face flex more and moves mass low and outward, usually giving higher launch and more ball speed on off-centre strikes than the TW757 Vx, at some cost in feel. Both use tungsten weighting to lower the centre of gravity and steady the head on off-centre strikes.
Both sets were introduced in 2022, so this is a choice between two models from the same lineup rather than an upgrade: Honma designed them to sit side by side for different players.
Which should you choose?
The TW757 Vx is the weaker-lofted set — up to 2.5° weaker than the TW757 P. That trades raw distance for a steeper landing angle and more predictable stopping power into greens.
Both charts are reproduced in full on their own pages: Honma TW757 P specs and Honma TW757 Vx specs.
Frequently asked questions
Is the Honma TW757 P stronger lofted than the TW757 Vx?
Yes. The Honma TW757 P 7-iron is 28.5° against 30° for the TW757 Vx, 1.5° stronger, which is worth roughly 4 to 6 yards of extra carry with the same swing.
What is the loft difference between the Honma TW757 P and TW757 Vx?
At the 7-iron the difference is 1.5° (28.5° vs 30°). The largest gap on a shared club is 2.5° at the 5-iron, and 6 of the 7 shared clubs differ.
Which is better for higher handicap golfers, the Honma TW757 P or the TW757 Vx?
The Honma TW757 P. As a players distance iron it is the more forgiving design, suited to roughly 5 to 15 handicaps who want extra distance from a compact head. The TW757 Vx is a players iron, better suited to roughly scratch to 10 handicaps.
Do the Honma TW757 P and TW757 Vx have the same lie and length?
Not exactly. At the 7-iron the Honma TW757 P is 61.5° lie and 37.25 inches, the TW757 Vx 61.5° and 37.125 inches. Both can be bent or built to your own fit.
Shop both models
Compare prices for new and used sets on eBay:
We may earn a commission from purchases made through links on this page at no extra cost to you.