Honma TW757 Vx Irons Specifications
Full factory loft, lie and length chart for the Honma TW757 Vx irons, 2022–present.
- Years produced
- 2022–present
- Category
- Players Irons
- Construction
- one-piece forged cavity back with a tungsten toe weight
- Material
- S20C forged carbon steel with a 7 g tungsten toe weight in the 4 to 8 irons
- Set makeup
- 4–PW
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) |
|---|---|---|---|---|
| 4 | 21 | 60 | 38.625 | 0.118 |
| 5 | 24 | 60.5 | 38.125 | 0.098 |
| 6 | 27 | 61 | 37.625 | 0.079 |
| 7 | 30 | 61.5 | 37.125 | — |
| 8 | 34 | 62 | 36.625 | — |
| 9 | 38 | 62.5 | 36.125 | — |
| PW | 43 | 63 | 35.625 | — |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Honma TW757 Vx
The Vx is the players iron of Honma's 2022 Tour World 757 range, a one-piece S20C forging with a seven-gram tungsten plug in the toe of the 4 to 8 irons to pull the centre of gravity back towards the middle of the face. It carries the TW747 Vx loft chart over unchanged from the 4-iron down — 30 degrees at the 7 — and builds the set an eighth of an inch longer at every club. Honma stamps the scoring clubs P and A on this generation rather than numbering them 10 and 11 as it did on the TW747.
Stock shafts
- Nippon N.S.Pro Modus3 Tour 105 — steel
- Honma VIZARD IB-WF — graphite
Related models
- Predecessor: Honma TW747 Vx
- The players-distance head of the same range: Honma TW757 P
- Compare: Honma TW757 Vx vs Honma TW747 Vx
- Compare: Honma TW757 Vx vs Honma TW757 P
Frequently asked questions
What is the loft of a Honma TW757 Vx 7-iron?
The Honma TW757 Vx 7-iron has a loft of 30 degrees, a lie of 61.5 degrees and a length of 37.125 inches.
What is the difference between the Honma TW747 Vx and TW757 Vx?
The lofts and lies are identical from the 4-iron down. The TW757 Vx is an eighth of an inch longer at every club and adds a seven-gram tungsten toe weight through the 4 to 8 irons.
When were the Honma TW757 Vx irons released?
Honma announced the T//World TW757 collection on 29 March 2022.
Where it sits in the lineup
Introduced in 2022, the Honma TW757 Vx is a current players set in the Honma range, with no replacement announced. It replaced the Honma TW747 Vx. New sets are built to the standard lofts, lies and lengths in the chart above, though a fitting can move any of them — so confirm the numbers on the order sheet. Used sets appear on eBay, 2nd Swing and Golf Avenue, and should be measured against this chart before buying.
- Honma's own TW757 Vx product page, specification table (https://honmagolf.com/sea/product-details/8942) — supplied every loft, lie and length above, the offsets for the 4 to 6 irons, both stock shafts and the set range.
- Note on offset: Honma publishes offset in millimetres (3.0, 2.5 and 2.0 mm for the 4 to 6 irons), converted to inches here; it is not published for the 7-iron and below, so the key is omitted there. Honma's chart also lists an A wedge at 49 degrees with no lie or length, so that club is not recorded.
- prnewswire.com 'Honma Golf Announces New T//World TW757 Collection', 29 March 2022 — announcement date, and the one-piece S20C forging with a 7 g tungsten toe weight in the 4 to 8 irons.
- Note: year_discontinued is null — no successor to the TW757 Vx had been announced in the sources retrieved.
Last reviewed 2026-07-28. Spot an error? [email protected]