Maltby TS-3 vs Maltby TS-4
Side-by-side factory specifications. Differing values are highlighted.
Specification comparison
| Club | TS-3 loft | TS-4 loft | TS-3 lie | TS-4 lie | TS-3 length | TS-4 length |
|---|---|---|---|---|---|---|
| 3 | — | 20 | — | 60.5 | — | 39 |
| 4 | 22 | 23 | 61 | 61 | 38.5 | 38.5 |
| 5 | 25 | 26 | 61.5 | 61.5 | 38 | 38 |
| 6 | 28 | 29.5 | 62 | 62 | 37.5 | 37.5 |
| 7 | 32 | 33 | 62.5 | 62.5 | 37 | 37 |
| 8 | 36 | 37 | 63 | 63 | 36.5 | 36.5 |
| 9 | 40 | 41 | 63.5 | 63.5 | 36 | 36 |
| PW | 44 | 45.5 | 64 | 64 | 35.5 | 35.5 |
| GW | 48 | 50 | 64 | 64 | 35.5 | 35.5 |
Highlighted cells differ between the two sets. Lofts and lies are factory standard.
Lofts compared
- TS-3
- TS-4
What the differences mean
At the 7-iron, the TS-3 is 32° and the TS-4 is 33°, a 1° gap. Each degree of loft is worth roughly 3 to 4 yards of carry at the same swing speed, so the TS-3 should carry roughly 3 to 4 yards further with that club, on a slightly lower, shallower flight than the TS-4. Across the 8 clubs both sets share, the TS-4 averages 1.2° weaker, with the largest gap at the GW (48° vs 50°). The pitching wedges are 44° and 45.5°; the stronger one leaves a 6° jump to a 50° gap wedge, which matters when planning wedge gapping.
The sets are built differently: the TS-3 runs 4-iron to GW (8 clubs), the TS-4 3-iron to GW (9 clubs).
The TS-3 is a super game improvement iron and the TS-4 a blade iron, so they sit 4 steps apart on the forgiveness scale. The TS-3 is the more forgiving design, with a wider sole, more offset and more perimeter weighting for high handicaps, beginners and slower swing speeds. The TS-4 trades some of that for a more compact head, thinner topline and more control over flight and shape, which suits low single-digit handicaps who strike the ball consistently.
The TS-3 is listed as five-step precision forged, co-forged tungsten toe weight, progressive cavity and the TS-4 as billet forged muscle back, co-forged tungsten toe weight, CMC inserts. Both use tungsten weighting to lower the centre of gravity and steady the head on off-centre strikes. The TS-4's muscle-back shape keeps mass directly behind the strike for feedback and control, where a cavity spreads it to the perimeter for forgiveness.
Both sets were introduced in 2023, so this is a choice between two models from the same lineup rather than an upgrade: Maltby designed them to sit side by side for different players.
Which should you choose?
The TS-4 is the weaker-lofted set — up to 2° weaker than the TS-3. That trades raw distance for a steeper landing angle and more predictable stopping power into greens.
Both charts are reproduced in full on their own pages: Maltby TS-3 specs and Maltby TS-4 specs.
Frequently asked questions
Is the Maltby TS-3 stronger lofted than the TS-4?
Yes. The Maltby TS-3 7-iron is 32° against 33° for the TS-4, 1° stronger, which is worth roughly 3 to 4 yards of extra carry with the same swing.
What is the loft difference between the Maltby TS-3 and TS-4?
At the 7-iron the difference is 1° (32° vs 33°). The largest gap on a shared club is 2° at the GW, and all 8 shared clubs differ.
Which is better for higher handicap golfers, the Maltby TS-3 or the TS-4?
The Maltby TS-3. As a super game improvement iron it is the more forgiving design, suited to high handicaps, beginners and slower swing speeds. The TS-4 is a blade iron, better suited to low single-digit handicaps who strike the ball consistently.
Do the Maltby TS-3 and TS-4 have the same lie and length?
At the 7-iron, yes: both are 62.5° lie and 37 inches long.
Shop both models
Compare prices for new and used sets on eBay:
We may earn a commission from purchases made through links on this page at no extra cost to you.