Maltby TS-3 Irons Specifications
Full factory loft, lie and length chart for the Maltby TS-3 irons, 2023–present.
- Years produced
- 2023–present
- Category
- Super Game Improvement Irons
- Construction
- five-step precision forged, co-forged tungsten toe weight, progressive cavity
- Material
- forged 1025C carbon steel with co-forged tungsten weight
- Set makeup
- 4–GW
Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) | Bounce |
|---|---|---|---|---|---|
| 4 | 22 | 61 | 38.5 | 0.115 | 3 |
| 5 | 25 | 61.5 | 38 | 0.115 | 3 |
| 6 | 28 | 62 | 37.5 | 0.115 | 3 |
| 7 | 32 | 62.5 | 37 | 0.11 | 3 |
| 8 | 36 | 63 | 36.5 | 0.11 | 4 |
| 9 | 40 | 63.5 | 36 | 0.11 | 4 |
| PW | 44 | 64 | 35.5 | 0.09 | 5 |
| GW | 48 | 64 | 35.5 | 0.09 | 5 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Maltby TS-3
The TS-3 joined Maltby's Tour Series in 2023 as the highest-MPF head in the family: it measures 849 at the 6-iron on Maltby's Playability Factor scale, deep in the Super Game Improvement band — the classification recorded here — even though it wears a diminutive, players-style profile with smooth lines and only a moderate topline. The trick is construction: each head is true-forged from 1025C carbon steel in a five-step precision process with a tungsten weight co-forged low and toward the toe, and the cavity design progresses through the set, shifting mass toe-ward and low in the long irons and toward neutral in the scoring clubs, over progressive .780-to-.800-inch sole widths. The CNC-milled face carries Maltby's multi-groove pattern, and lofts are moderate for the forgiveness on offer — a 32-degree 7-iron and 44-degree pitching wedge across a 4-GW chart in satin mirror nickel-chrome, right hand only. The GolfWorks sells it as bare heads or built-to-spec custom sets, so the lengths below are the company's published standard men's steel assembly lengths. A TS-3.5 and a DBM black finish followed in 2025 without retiring it.
Related models
- Tour Series blade released the same year: Maltby TS-4
- The original Tour Series players head: Maltby TS-1
- Compare: Maltby TS-3 vs Maltby TS-2
- Compare: Maltby TS-3 vs Maltby TS-4
- Compare: Maltby TS-3 vs Maltby TS-1
Frequently asked questions
What is the loft of a Maltby TS-3 7-iron?
The Maltby TS-3 7-iron has a loft of 32 degrees and a lie of 62.5 degrees, with 0.110 inches of offset and a 37-inch length on The GolfWorks' standard steel build.
Why is the Maltby TS-3 classed as super game improvement?
Because of its measured forgiveness rather than its looks: it rates 849 on Maltby's MPF scale — Super Game Improvement territory — thanks to co-forged tungsten toe weighting and progressive cavities, despite a compact profile with a moderate topline.
Is the Maltby TS-3 forged?
Yes — true-forged from 1025C carbon steel in a five-step precision process, with the tungsten toe weight co-forged into the head rather than glued or screwed in.
When did the Maltby TS-3 come out?
It appeared with The GolfWorks' 2023 Maltby releases and remains on sale; a TS-3.5 head and a DBM black-finish version were added in 2025 alongside it.
Where it sits in the lineup
Introduced in 2023, the Maltby TS-3 is a current super game improvement set in the Maltby range, with no replacement announced. New sets are built to the standard lofts, lies and lengths in the chart above, though a fitting can move any of them — so confirm the numbers on the order sheet. Used sets appear on eBay, 2nd Swing and Golf Avenue, and should be measured against this chart before buying.
- The GolfWorks official Maltby TS3 Iron Head page (golfworks.com/maltby-ts3-iron-head/p/ma0340/) and its factory specification chart — 4-GW lofts 22/25/28/32/36/40/44/48, lies 61-64, offsets 0.115 to 0.090 inches, bounces 3-5 degrees, head weights 245-289 g, satin chrome polish, 1025 carbon steel, .780-.800-inch progressive sole widths, universal hosel, and the listed MPF of 849, plus the construction copy: five-step true forging, co-forged tungsten toe weight, progressive cavity designs and CNC-milled multi-groove face.
- The GolfWorks Head MPF Ratings chart (golfworks.com/content/PDFs/Head_MPFs/MPFRatingsChart.pdf, updated July 2026) — 'MALTBY TS3 Forged #6 2023, MPF 849' in the Super Game Improvement section, fixing both year_introduced 2023 and the category recorded here.
- GolfWRX club-techs threads 'The GolfWorks - Maltby 2023 New Releases' and 'Maltby TS3 Irons' (May 2023) — the TS3's arrival on the GolfWorks site as part of the 2023 lineup.
- Lengths are from The GolfWorks' published Standard Lengths chart (golfworks.com/images/art/StdLengths.pdf, men's steel: 38.5-inch 4-iron through 35.5-inch PW and GW) because Maltby heads are sold component-style and built to order; playing lengths vary per build, hence confidence medium.
Last reviewed 2026-07-29. Spot an error? [email protected]