Miura TC-201 vs Miura TC-202
Side-by-side factory specifications. Differing values are highlighted.
Specification comparison
| Club | TC-201 loft | TC-202 loft | TC-201 lie | TC-202 lie | TC-201 length | TC-202 length |
|---|---|---|---|---|---|---|
| 3 | 21 | 21 | 60.5 | 60.5 | 39 | 39 |
| 4 | 23 | 23 | 61 | 61 | 38.5 | 38.5 |
| 5 | 26 | 26 | 61.5 | 61.5 | 38 | 38 |
| 6 | 29 | 29 | 62 | 62 | 37.5 | 37.5 |
| 7 | 33 | 33 | 62.5 | 62.5 | 37 | 37 |
| 8 | 37 | 37 | 63 | 63 | 36.5 | 36.5 |
| 9 | 41 | 41 | 63.5 | 63.5 | 36 | 36 |
| PW | 46 | 45 | 64 | 64 | 35.75 | 35.75 |
| GW | — | 50 | — | 64 | — | 35.5 |
Highlighted cells differ between the two sets. Lofts and lies are factory standard.
Lofts compared
- TC-201
- TC-202
What the differences mean
At the 7-iron, the TC-201 is 33° and the TC-202 is 33°, identical at the club most golfers compare on, although other clubs in the sets differ. Across the 8 clubs both sets share, the differences roughly cancel out, with the largest gap at the PW (46° vs 45°). The pitching wedges are 46° and 45°; the stronger one leaves a 5° jump to a 50° gap wedge, which matters when planning wedge gapping.
The sets are built differently: the TC-201 runs 3-iron to PW (8 clubs), the TC-202 3-iron to GW (9 clubs).
Both are players irons, built for roughly scratch to 10 handicaps. Small-to-mid cavity backs with traditional lofts, modest offset and workable shaping for low-handicap players. Because they target the same golfer, the decision comes down to the specific loft, feel and shaping differences rather than who the sets are made for.
The TC-201 is listed as forged (hand-forged in Himeji, Japan) and the TC-202 as forged tour cavity with T-Weight Bar and variable-depth cavity. With the build method this similar, differences in feel come down to head size, sole width, topline and offset rather than how the heads are made.
There are 5 years between these sets (2020 and 2025), more than one design generation. Over that time irons moved toward stronger lofts, thinner and faster faces, hollow and multi-material heads and wider use of tungsten, so the newer set is not simply a better version of the older one: it may launch and spin quite differently.
Which should you choose?
The TC-202 is the stronger-lofted set — up to 1° stronger than the TC-201 on matching clubs. Expect longer carry per numbered iron but a flatter descent angle; gapping at the wedge end is where that shows up.
Both charts are reproduced in full on their own pages: Miura TC-201 specs and Miura TC-202 specs.
Frequently asked questions
Is the Miura TC-201 stronger lofted than the TC-202?
Not at the 7-iron, where both are 33°. Other clubs in the sets differ, so compare the full table above.
What is the loft difference between the Miura TC-201 and TC-202?
At the 7-iron the difference is 0° (33° vs 33°). The largest gap on a shared club is 1° at the PW, and 1 of the 8 shared clubs differ.
Are the Miura TC-201 and TC-202 aimed at the same golfer?
Yes. Both are players irons, built for roughly scratch to 10 handicaps. Choose on feel, looks and gapping, ideally after hitting both.
Do the Miura TC-201 and TC-202 have the same lie and length?
At the 7-iron, yes: both are 62.5° lie and 37 inches long.
Shop Miura TC-201
Compare prices for new and used sets on eBay:
We may earn a commission from purchases made through links on this page at no extra cost to you.