Mizuno MP-18 MB vs Mizuno MP-18 MMC

Side-by-side factory specifications. Differing values are highlighted.

Specification comparison

ClubMP-18 MB loftMP-18 MMC loftMP-18 MB lieMP-18 MMC lieMP-18 MB lengthMP-18 MMC length
321—59.5—38.75—
42422606038.2538.25
5272560.560.537.7537.75
63028616137.2537.25
7343261.561.536.7536.75
83836626236.2536.25
9424162.562.535.7535.75
PW4646636335.535.5

Highlighted cells differ between the two sets. Lofts and lies are factory standard.

Lofts compared

  • MP-18 MB
  • MP-18 MMC
MP-18 MB and MP-18 MMC lofts comparedLine chart of loft in degrees by club for the MP-18 MB and the MP-18 MMC. 3: 21 and none. 4: 24 and 22. 5: 27 and 25. 6: 30 and 28. 7: 34 and 32. 8: 38 and 36. 9: 42 and 41. PW: 46 and 46.20°30°40°50°3456789PWMP-18 MB 3: 21°MP-18 MB 4: 24°MP-18 MB 5: 27°MP-18 MB 6: 30°MP-18 MB 7: 34°MP-18 MB 8: 38°MP-18 MB 9: 42°MP-18 MB PW: 46°MP-18 MMC 4: 22°MP-18 MMC 5: 25°MP-18 MMC 6: 28°MP-18 MMC 7: 32°MP-18 MMC 8: 36°MP-18 MMC 9: 41°MP-18 MMC PW: 46°Loft
Lofts differ on 6 of the 7 clubs the two sets share. A lower point is a stronger loft.

What the differences mean

At the 7-iron, the MP-18 MB is 34° and the MP-18 MMC is 32°, a 2° gap. Each degree of loft is worth roughly 3 to 4 yards of carry at the same swing speed, so the MP-18 MMC should carry roughly 6 to 8 yards further with that club, on a slightly lower, shallower flight than the MP-18 MB. Across the 7 clubs both sets share, the MP-18 MMC averages 1.6° stronger, with the largest gap at the 4-iron (24° vs 22°).

The sets are built differently: the MP-18 MB runs 3-iron to PW (8 clubs), the MP-18 MMC 4-iron to PW (7 clubs).

The MP-18 MB is a blade iron and the MP-18 MMC a players iron, so they sit one step apart on the forgiveness scale. The MP-18 MMC is the more forgiving design, with a wider sole, more offset and more perimeter weighting for roughly scratch to 10 handicaps. The MP-18 MB trades some of that for a more compact head, thinner topline and more control over flight and shape, which suits low single-digit handicaps who strike the ball consistently.

Both heads are listed as forged. The MP-18 MMC adds tungsten weighting, which lowers the centre of gravity and raises stability on mis-hits, helping the long irons launch.

Both sets were introduced in 2017, so this is a choice between two models from the same lineup rather than an upgrade: Mizuno designed them to sit side by side for different players.

Which should you choose?

The MP-18 MMC is the stronger-lofted set — up to 2° stronger than the MP-18 MB on matching clubs. Expect longer carry per numbered iron but a flatter descent angle; gapping at the wedge end is where that shows up.

Both charts are reproduced in full on their own pages: Mizuno MP-18 MB specs and Mizuno MP-18 MMC specs.

Frequently asked questions

Is the Mizuno MP-18 MB stronger lofted than the MP-18 MMC?

No. The MP-18 MMC is the stronger-lofted set: its 7-iron is 32° against 34° for the Mizuno MP-18 MB, 2° stronger and worth roughly 6 to 8 yards of extra carry.

What is the loft difference between the Mizuno MP-18 MB and MP-18 MMC?

At the 7-iron the difference is 2° (34° vs 32°). The largest gap on a shared club is 2° at the 4-iron, and 6 of the 7 shared clubs differ.

Which is better for higher handicap golfers, the Mizuno MP-18 MB or the MP-18 MMC?

The MP-18 MMC. As a players iron it is the more forgiving design, suited to roughly scratch to 10 handicaps. The Mizuno MP-18 MB is a blade iron, better suited to low single-digit handicaps who strike the ball consistently.

Do the Mizuno MP-18 MB and MP-18 MMC have the same lie and length?

At the 7-iron, yes: both are 61.5° lie and 36.75 inches long.

Shop Mizuno MP-18 MB

Compare prices for new and used sets on eBay:

We may earn a commission from purchases made through links on this page at no extra cost to you.