Mizuno MP-18 MMC Irons Specifications
Full factory loft, lie and length chart for the Mizuno MP-18 MMC irons, 2017–2019.
- Years produced
- 2017–2019
- Category
- Players Irons
- Construction
- forged
- Material
- 1025E mild carbon steel with titanium and tungsten weighting
- Set makeup
- 4–PW
Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) | Bounce |
|---|---|---|---|---|---|
| 4 | 22 | 60 | 38.25 | 0.138 | 2 |
| 5 | 25 | 60.5 | 37.75 | 0.134 | 2 |
| 6 | 28 | 61 | 37.25 | 0.13 | 3 |
| 7 | 32 | 61.5 | 36.75 | 0.122 | 3 |
| 8 | 36 | 62 | 36.25 | 0.114 | 4 |
| 9 | 41 | 62.5 | 35.75 | 0.106 | 5 |
| PW | 46 | 63 | 35.5 | 0.098 | 6 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Mizuno MP-18 MMC
The MP-18 MMC is the multi-material model in Mizuno's MP-18 family, combining an HD Grain Flow Forged 1025E mild carbon steel body with a titanium insert and tungsten toe weighting in the longer irons. It is the most forgiving of the three MP-18 heads and runs a separate spec from the MB and SC, roughly 2 degrees stronger through most of the set with a 32-degree 7-iron and noticeably more offset. The stock set was 4-PW, with Fli-Hi models covering the long irons. Specs below are the men's standard steel-shaft build.
Stock shafts
- True Temper Dynamic Gold — steel
- Nippon N.S. Pro Modus3 Tour 120 — steel
- Project X LZ — steel
Related models
- Predecessor: Mizuno MP-15
- Successor: Mizuno MP-20 MMC
- Same family: Mizuno MP-18 SC
- Same family: Mizuno MP-18 MB
- Compare: Mizuno MP-18 MMC vs Mizuno MP-15
- Compare: Mizuno MP-18 MMC vs Mizuno MP-20 MMC
- Compare: Mizuno MP-18 MMC vs Mizuno MP-18 SC
- Compare: Mizuno MP-18 MMC vs Mizuno MP-18 MB
- Compare: Mizuno MP-18 MMC vs Mizuno MP-25
- Compare: Mizuno MP-18 MMC vs Mizuno MP-H5
Frequently asked questions
What is the loft of a Mizuno MP-18 MMC 7-iron?
The Mizuno MP-18 MMC 7-iron has a loft of 32 degrees, with a 61.5-degree lie and a 36.75-inch steel-shaft length.
Why are the MP-18 MMC lofts different from the MP-18 MB and SC?
The MMC is built as a separate spec that runs about 2 degrees stronger than the MB and SC from the 4-iron through the 9-iron, though both lines finish at a 46-degree pitching wedge. It also carries more offset, from 0.138 inches in the 4-iron down to 0.098 inches in the pitching wedge.
What clubs came in the stock Mizuno MP-18 MMC set?
The MMC was sold as a 4-PW set. Long-iron replacements came from the separate MP-18 MMC Fli-Hi models rather than a 3-iron in the same head shape.
Finding a used set
The Mizuno MP-18 MMC ran from 2017 to 2019 and is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- 2ndswing.com Mizuno MP-18 MMC Iron Set product page, full loft/lie/length/offset/bounce spec table and shaft listings
- PluggedInGolf.com Mizuno MP-18 MMC irons review (titanium and tungsten construction, 4-PW set makeup)
- Golfalot Mizuno MP-18 SC / MMC / Fli-Hi irons review (family positioning and loft differences vs the MB and SC)
Last reviewed 2026-09-05. Spot an error? info@loftchart.com