PXG 0311 P GEN6 vs PXG 0317 T
Side-by-side factory specifications. Differing values are highlighted.
Specification comparison
| Club | 0311 P GEN6 loft | 0317 T loft | 0311 P GEN6 lie | 0317 T lie | 0311 P GEN6 length | 0317 T length |
|---|---|---|---|---|---|---|
| 3 | — | 20 | — | 60.5 | — | 39.5 |
| 4 | 20.5 | 22.5 | 61 | 61 | 38.875 | 38.875 |
| 5 | 23 | 25 | 61.5 | 61.5 | 38.25 | 38.25 |
| 6 | 26 | 28 | 62 | 62 | 37.625 | 37.625 |
| 7 | 30 | 32 | 62.5 | 62.5 | 37 | 37 |
| 8 | 34 | 36 | 63 | 63 | 36.5 | 36.5 |
| 9 | 39 | 41 | 63.5 | 63.5 | 36 | 36 |
| PW | 44 | 46 | 64 | 64 | 35.75 | 35.75 |
| GW | 49 | 51 | 64 | 64 | 35.5 | 35.5 |
Highlighted cells differ between the two sets. Lofts and lies are factory standard.
Lofts compared
- 0311 P GEN6
- 0317 T
What the differences mean
At the 7-iron, the 0311 P GEN6 is 30° and the 0317 T is 32°, a 2° gap. Each degree of loft is worth roughly 3 to 4 yards of carry at the same swing speed, so the 0311 P GEN6 should carry roughly 6 to 8 yards further with that club, on a slightly lower, shallower flight than the 0317 T. Across the 8 clubs both sets share, the 0317 T averages 2° weaker, with the largest gap at the 4-iron (20.5° vs 22.5°). The pitching wedges are 44° and 46°; the stronger one leaves a 6° jump to a 50° gap wedge, which matters when planning wedge gapping.
The sets are built differently: the 0311 P GEN6 runs 4-iron to GW (8 clubs), the 0317 T 3-iron to GW (9 clubs).
The 0311 P GEN6 is a players distance iron and the 0317 T a players iron, so they sit one step apart on the forgiveness scale. The 0311 P GEN6 is the more forgiving design, with a wider sole, more offset and more perimeter weighting for roughly 5 to 15 handicaps who want extra distance from a compact head. The 0317 T trades some of that for a more compact head, thinner topline and more control over flight and shape, which suits roughly scratch to 10 handicaps.
The 0311 P GEN6 is listed as forged hollow body with an XCOR2 core and the 0317 T as triple-forged hollow body with an internal tungsten toe weight. Both use hollow-body heads, so both trade a little feel for face flex and launch help. The 0317 T adds tungsten weighting, which lowers the centre of gravity and raises stability on mis-hits, helping the long irons launch.
Both sets were introduced in 2023, so this is a choice between two models from the same lineup rather than an upgrade: PXG designed them to sit side by side for different players.
Which should you choose?
The 0317 T is the weaker-lofted set — up to 2° weaker than the 0311 P GEN6. That trades raw distance for a steeper landing angle and more predictable stopping power into greens.
Both charts are reproduced in full on their own pages: PXG 0311 P GEN6 specs and PXG 0317 T specs.
Frequently asked questions
Is the PXG 0311 P GEN6 stronger lofted than the 0317 T?
Yes. The PXG 0311 P GEN6 7-iron is 30° against 32° for the 0317 T, 2° stronger, which is worth roughly 6 to 8 yards of extra carry with the same swing.
What is the loft difference between the PXG 0311 P GEN6 and 0317 T?
At the 7-iron the difference is 2° (30° vs 32°). The largest gap on a shared club is 2° at the 4-iron, and all 8 shared clubs differ.
Which is better for higher handicap golfers, the PXG 0311 P GEN6 or the 0317 T?
The PXG 0311 P GEN6. As a players distance iron it is the more forgiving design, suited to roughly 5 to 15 handicaps who want extra distance from a compact head. The 0317 T is a players iron, better suited to roughly scratch to 10 handicaps.
Do the PXG 0311 P GEN6 and 0317 T have the same lie and length?
At the 7-iron, yes: both are 62.5° lie and 37 inches long.
Shop both models
Compare prices for new and used sets on eBay:
We may earn a commission from purchases made through links on this page at no extra cost to you.