Srixon Z 745 vs Srixon Z 355

Side-by-side factory specifications. Differing values are highlighted.

Specification comparison

ClubZ 745 loftZ 355 loftZ 745 lieZ 355 lieZ 745 lengthZ 355 length
320—60—39—
4222260.560.538.538.5
5252461613838
6282761.561.537.537.5
7323162623737
8363562.562.536.536.5
9413963633636
PW464463.563.535.535.5
AW—50—63.5—35.5

Highlighted cells differ between the two sets. Lofts and lies are factory standard.

Lofts compared

  • Z 745
  • Z 355
Z 745 and Z 355 lofts comparedLine chart of loft in degrees by club for the Z 745 and the Z 355. 3: 20 and none. 4: 22 and 22. 5: 25 and 24. 6: 28 and 27. 7: 32 and 31. 8: 36 and 35. 9: 41 and 39. PW: 46 and 44. AW: none and 50.20°30°40°50°3456789PWAWZ 745 3: 20°Z 745 4: 22°Z 745 5: 25°Z 745 6: 28°Z 745 7: 32°Z 745 8: 36°Z 745 9: 41°Z 745 PW: 46°Z 355 4: 22°Z 355 5: 24°Z 355 6: 27°Z 355 7: 31°Z 355 8: 35°Z 355 9: 39°Z 355 PW: 44°Z 355 AW: 50°Loft
Lofts differ on 6 of the 7 clubs the two sets share. A lower point is a stronger loft.

What the differences mean

At the 7-iron, the Z 745 is 32° and the Z 355 is 31°, a 1° gap. Each degree of loft is worth roughly 3 to 4 yards of carry at the same swing speed, so the Z 355 should carry roughly 3 to 4 yards further with that club, on a slightly lower, shallower flight than the Z 745. Across the 7 clubs both sets share, the Z 355 averages 1.1° stronger, with the largest gap at the 9-iron (41° vs 39°). The pitching wedges are 46° and 44°; the stronger one leaves a 6° jump to a 50° gap wedge, which matters when planning wedge gapping.

The sets are built differently: the Z 745 runs 3-iron to PW (8 clubs), the Z 355 4-iron to AW (8 clubs).

The Z 745 is a players iron and the Z 355 a game improvement iron, so they sit 2 steps apart on the forgiveness scale. The Z 355 is the more forgiving design, with a wider sole, more offset and more perimeter weighting for roughly 10 to 25 handicaps. The Z 745 trades some of that for a more compact head, thinner topline and more control over flight and shape, which suits roughly scratch to 10 handicaps.

The Z 745 is listed as forged compact cavity back and the Z 355 as cast, split construction across the set. Forging, as in the Z 745, is generally credited with a softer feel; casting, as in the Z 355, allows more complex cavity and weighting shapes, which is why it dominates forgiving irons.

The Z 355 came out 1 year after the Z 745, but it is a different line rather than a direct replacement, so the two were designed for different golfers as well as different seasons.

Which should you choose?

The Z 355 is the stronger-lofted set — up to 2° stronger than the Z 745 on matching clubs. Expect longer carry per numbered iron but a flatter descent angle; gapping at the wedge end is where that shows up.

Both charts are reproduced in full on their own pages: Srixon Z 745 specs and Srixon Z 355 specs.

Frequently asked questions

Is the Srixon Z 745 stronger lofted than the Z 355?

No. The Z 355 is the stronger-lofted set: its 7-iron is 31° against 32° for the Srixon Z 745, 1° stronger and worth roughly 3 to 4 yards of extra carry.

What is the loft difference between the Srixon Z 745 and Z 355?

At the 7-iron the difference is 1° (32° vs 31°). The largest gap on a shared club is 2° at the 9-iron, and 6 of the 7 shared clubs differ.

Which is better for higher handicap golfers, the Srixon Z 745 or the Z 355?

The Z 355. As a game improvement iron it is the more forgiving design, suited to roughly 10 to 25 handicaps. The Srixon Z 745 is a players iron, better suited to roughly scratch to 10 handicaps.

Do the Srixon Z 745 and Z 355 have the same lie and length?

At the 7-iron, yes: both are 62° lie and 37 inches long.

Shop both models

Compare prices for new and used sets on eBay:

We may earn a commission from purchases made through links on this page at no extra cost to you.