Srixon Z 355 Irons Specifications
Full factory loft, lie and length chart for the Srixon Z 355 irons, 2015–2017.
- Years produced
- 2015–2017
- Category
- Game Improvement Irons
- Construction
- cast, split construction across the set
- Material
- HT1770 maraging steel face with a 17-4 stainless body in the 4 to 7 irons, one-piece 431 steel from the 8-iron down
- Set makeup
- 4–AW
Data confidence: low. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) |
|---|---|---|---|
| 4 | 22 | 60.5 | 38.5 |
| 5 | 24 | 61 | 38 |
| 6 | 27 | 61.5 | 37.5 |
| 7 | 31 | 62 | 37 |
| 8 | 35 | 62.5 | 36.5 |
| 9 | 39 | 63 | 36 |
| PW | 44 | 63.5 | 35.5 |
| AW | 50 | 63.5 | 35.5 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Srixon Z 355
The Z 355 is the forgiving model in Srixon's 2015 Z line and uses a split construction: the 4 to 7 irons are two-piece, with an HT1770 maraging steel face on a 17-4 stainless body, while the 8-iron through approach wedge are one-piece soft 431 steel for feel. Srixon pairs the heavier heads with a high-balance-point shaft — its Action Mass Tech — and shapes the sole with the Tour V.T. profile, more bounce at the leading edge and less at the trailing edge. Lofts are moderate for a game-improvement iron at 31 degrees for the 7-iron.
Related models
- Players-distance sibling: Srixon Z 545
- Players sibling: Srixon Z 745
- Successor generation: Srixon Z 565
- Compare: Srixon Z 355 vs Srixon Z 745
Frequently asked questions
What is the loft of a Srixon Z 355 7-iron?
The Srixon Z 355 7-iron has a loft of 31 degrees, a lie of 62.0 degrees and a length of 37.00 inches.
When were Srixon Z 355 irons made?
The Z 355 launched in North America in September 2015 and stayed in the range until Srixon moved to the Z 565 and Z 765 in 2016 and 2017.
Why is the Srixon Z 355 built from two different steels?
The 4 to 7 irons use a hard HT1770 maraging face on a 17-4 body to get ball speed where distance matters. The 8-iron down is one-piece soft 431 steel, because those clubs are about feel and control rather than speed.
What is the Tour V.T. Sole?
Srixon's sole profile: more bounce at the leading edge and less at the trailing edge, creating a V shape that lets the head enter the turf cleanly and exit without dragging.
Finding a used set
The Srixon Z 355 ran from 2015 to 2017 and is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- qsponge.com Srixon Z 355 iron spec listing — loft, lie and length for the 4-iron through approach wedge. The 7-iron figures (31 degrees, 62.0 lie, 37.00 inches) are independently corroborated by the todays-golfer.com and pluggedingolf.com Z 355 reviews.
- 2ndswing.com Srixon Z 355 Iron Set page — the split construction (HT1770 maraging face with a 17-4 body in the 4 to 7 irons, one-piece 431 steel from the 8-iron down), Action Mass Tech and the Tour V.T. Sole.
- thegolfwire.com 'Srixon Introduces New Z 355 Woods And Irons' — dates the North American launch to September 2015.
- Note: offset, bounce and swing weight were not published in the sources consulted and are omitted rather than estimated. The Z 355 shares its loft, lie and length chart with the Z 545 of the same generation from the 4-iron down, which is consistent with Srixon using a common chart across the line.
Last reviewed 2026-07-28. Spot an error? [email protected]