TaylorMade Burner LCG vs TaylorMade SuperSteel
Side-by-side factory specifications. Differing values are highlighted.
Specification comparison
| Club | Burner LCG loft | SuperSteel loft | Burner LCG lie | SuperSteel lie | Burner LCG length | SuperSteel length |
|---|---|---|---|---|---|---|
| 2 | 19 | 19 | 60 | 60.5 | 39.5 | 39 |
| 3 | 21 | 21 | 60.5 | 61 | 39 | 38.5 |
| 4 | 24 | 24 | 61 | 61.5 | 38.5 | 38 |
| 5 | 27 | 27 | 61.5 | 61.5 | 38 | 37.5 |
| 6 | 30 | 30 | 62 | 62 | 37.5 | 37 |
| 7 | 33 | 33 | 62.5 | 62.5 | 37 | 36.5 |
| 8 | 37 | 37 | 63 | 63 | 36.5 | 36 |
| 9 | 41 | 41 | 63.5 | 63.5 | 36 | 35.5 |
| PW | 45 | 45 | 64 | 64 | 35.5 | 35 |
| AW | 50 | 50 | 64 | 64 | 35.5 | 35 |
| SW | 55 | 55 | 64 | 64 | 35.25 | 34.75 |
| LW | 60 | 60 | 64 | 64 | 35 | 34.5 |
Highlighted cells differ between the two sets. Lofts and lies are factory standard.
Lofts compared
- Burner LCG
- SuperSteel
What the differences mean
Every club the two sets share has exactly the same loft, starting with a 33° 7-iron. On paper there is no distance or trajectory difference: with the same swing, a 7-iron from either set should launch and carry about the same. The real differences are in how the heads are built, how they look at address and how they feel at impact, none of which a spec table can show.
Both are game improvement irons, built for roughly 10 to 25 handicaps. Perimeter-weighted cavity backs with wider soles, more offset and stronger lofts, aimed at mid handicaps. Because they target the same golfer, the decision comes down to the specific loft, feel and shaping differences rather than who the sets are made for.
Both heads are listed as investment cast. With the build method this similar, differences in feel come down to head size, sole width, topline and offset rather than how the heads are made.
The SuperSteel arrived 2 years after the Burner LCG, a typical one-generation refresh. Changes over that span are usually incremental: refined face thickness, revised weighting, updated looks and small loft tweaks rather than a new concept.
Which should you choose?
The Burner LCG and SuperSteel share the same lofts on every club on file, so the difference is in head construction, feel and forgiveness rather than trajectory.
Both charts are reproduced in full on their own pages: TaylorMade Burner LCG specs and TaylorMade SuperSteel specs.
Frequently asked questions
Is the TaylorMade Burner LCG stronger lofted than the SuperSteel?
No. Both have a 33° 7-iron and the same loft on every club they share, so neither is stronger lofted. The difference is in construction and feel.
What is the loft difference between the TaylorMade Burner LCG and SuperSteel?
There is none. Every club both sets include has the same loft, including the 33° 7-iron.
Are the TaylorMade Burner LCG and SuperSteel aimed at the same golfer?
Yes. Both are game improvement irons, built for roughly 10 to 25 handicaps. Choose on feel, looks and gapping, ideally after hitting both.
Do the TaylorMade Burner LCG and SuperSteel have the same lie and length?
Not exactly. At the 7-iron the TaylorMade Burner LCG is 62.5° lie and 37 inches, the SuperSteel 62.5° and 36.5 inches. Both can be bent or built to your own fit.
Shop both models
Compare prices for new and used sets on eBay:
We may earn a commission from purchases made through links on this page at no extra cost to you.