TaylorMade Burner LCG Irons Specifications
Full factory loft, lie and length chart for the TaylorMade Burner LCG irons, 1997–1999.
- Years produced
- 1997–1999
- Category
- Game Improvement Irons
- Construction
- investment cast
- Material
- stainless steel
- Set makeup
- 2–LW
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) |
|---|---|---|---|
| 2 | 19 | 60 | 39.5 |
| 3 | 21 | 60.5 | 39 |
| 4 | 24 | 61 | 38.5 |
| 5 | 27 | 61.5 | 38 |
| 6 | 30 | 62 | 37.5 |
| 7 | 33 | 62.5 | 37 |
| 8 | 37 | 63 | 36.5 |
| 9 | 41 | 63.5 | 36 |
| PW | 45 | 64 | 35.5 |
| AW | 50 | 64 | 35.5 |
| SW | 55 | 64 | 35.25 |
| LW | 60 | 64 | 35 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the TaylorMade Burner LCG
The Burner LCG - Low Center of Gravity - followed the Burner Oversize as TaylorMade's Bubble-shaft game-improvement iron of the late 1990s, sold in the same copper-and-black cosmetic family. Sole weighting drops the centre of gravity for higher flight from the same strong lofts as the Oversize, with a 33-degree 7-iron and 45-degree pitching wedge across a 2-iron-to-lob-wedge range. TaylorMade's Irons Legacy timeline files it under 1997 as the Burner Bubble LCG; equip2golf lists it under 1998, its main retail year. Lengths below are the stock Bubble graphite build; the Royal Precision Rifle steel option played 0.5 inches shorter.
Stock shafts
- TaylorMade Burner Bubble — graphite
- Royal Precision Rifle — steel
Related models
- Predecessor Bubble-era iron: TaylorMade Burner Oversize
- Successor distance iron: TaylorMade SuperSteel
- Multi-material stablemate: TaylorMade Firesole
- Compare: TaylorMade Burner LCG vs TaylorMade Burner Bubble
- Compare: TaylorMade Burner LCG vs TaylorMade SuperSteel
- Compare: TaylorMade Burner LCG vs TaylorMade Firesole
Frequently asked questions
What is the loft of a TaylorMade Burner LCG 7-iron?
The Burner LCG 7-iron has a loft of 33 degrees, with a 62.5-degree lie and a 37-inch length with the stock Bubble graphite shaft (36.5 inches with the Rifle steel shaft).
What does LCG stand for on TaylorMade Burner irons?
LCG stands for Low Center of Gravity: sole-concentrated weighting designed to launch the ball higher than the Burner Oversize it replaced, while keeping the same strong lofts.
What shafts did the Burner LCG come with?
The stock graphite shaft was TaylorMade's copper-coloured Burner Bubble, with the Royal Precision Rifle stepless steel shaft as the alternative, half an inch shorter per club.
Finding a used set
The TaylorMade Burner LCG ran from 1997 to 1999 and is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- TaylorMade official vintage-clubs archive, Burner LCG irons specification table (club, loft, lie, men's and women's Bubble shaft lengths; steel noted as 0.5 inches shorter), taylormadegolf.com/vintage_detail.asp irons pages, 2006 capture via web.archive.org
- equip2golf.com Taylor Made Burner LCG specifications page: identical 2-LW loft/lie/length table filed under 1998, Bubble graphite and Rifle shaft options, All Weather Crossline Bubble grip, LCG expanded as Low Center of Gravity
- Year note: TaylorMade's Irons Legacy timeline lists 'BURNER BUBBLE LCG' under 1997; equip2golf and pitchmarks.com use 1998. The manufacturer's own date is used here
Last reviewed 2026-07-29. Spot an error? [email protected]