TaylorMade Burner Oversize Irons Specifications
Full factory loft, lie and length chart for the TaylorMade Burner Oversize irons, 1996–1998.
- Years produced
- 1996–1998
- Category
- Game Improvement Irons
- Construction
- investment cast
- Material
- stainless steel
- Set makeup
- 2–LW
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) |
|---|---|---|---|
| 2 | 19 | 60 | 39.5 |
| 3 | 21 | 60.5 | 39 |
| 4 | 24 | 61 | 38.5 |
| 5 | 27 | 61.5 | 38 |
| 6 | 30 | 62 | 37.5 |
| 7 | 33 | 62.5 | 37 |
| 8 | 37 | 63 | 36.5 |
| 9 | 41 | 63.5 | 36 |
| PW | 45 | 64 | 35.5 |
| AW | 50 | 64 | 35.5 |
| SW | 55 | 64 | 35 |
| LW | 60 | 64 | 34.5 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
Shop TaylorMade Burner Oversize
Compare prices for new and used sets on eBay:
We may earn a commission from purchases made through links on this page at no extra cost to you.
Loft progression
About the TaylorMade Burner Oversize
The Burner Oversize (also sold as the Burner Bubble Oversize) was TaylorMade's hugely popular mid-1990s game-improvement iron, built around the copper-coloured Bubble graphite shaft that concentrates weight below the grip for faster swings. The oversized cast cavityback head carries progressive offset, a high moment of inertia and a low centre of gravity, and the set runs 2-iron through lob wedge with a 33-degree 7-iron and 45-degree pitching wedge. Specs below are the men's standard build with the stock Bubble graphite shaft, per TaylorMade's own vintage archive; the Rifle steel option played 0.5 inches shorter per club.
Stock shafts
- TaylorMade Bubble — graphite · flexes: L-60, M-70, R-80, S-90, TS-100
- Rifle (FM Precision / Royal Precision) — steel · flexes: R-80, S-90, TS-100
Related models
Frequently asked questions
What is the loft of a TaylorMade Burner Oversize 7-iron?
The TaylorMade Burner Oversize 7-iron has a loft of 33 degrees, with a 62.5-degree lie and a 37-inch length with the stock Bubble graphite shaft (36.5 inches in steel).
What is the Bubble shaft on the Burner Oversize irons?
The Bubble is TaylorMade's signature 1990s graphite shaft, with a widened, hollow section just below the grip that moves weight up the shaft to reduce deflection at impact and make the club easier to swing fast. Flexes ran from L-60 for slower swings to TS-100 tour stiff, with a Rifle stepless steel shaft as the alternative.
What clubs were available in the Burner Oversize set?
The range ran from a 19-degree 2-iron through a 60-degree lob wedge, including a 50-degree attack wedge and 55-degree sand wedge, so a full 12 clubs were offered.
Finding a used set
The TaylorMade Burner Oversize ran from 1996 to 1998 and is no longer in production, so the used market is the only source. Search the used listings on eBay, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- TaylorMade official vintage-clubs archive, Burner Oversize irons specification table (club, loft, lie, men's and women's Bubble shaft lengths; steel noted as 0.5 inches shorter), taylormadegolf.com/vintage_detail.asp irons pages, 2006 capture via web.archive.org
- 1996 introduction, 2-LW set composition and Bubble/Rifle shaft options: TaylorMade's own 1997-98 Burner Bubble Irons product pages (taylormadegolf.com/proshop/irons.html, January 1997 capture via web.archive.org) and the GolfWorks TaylorMade shaft reference table (1996 Oversize Burner Irons entries)
Last updated 28 July 2026. Spot an error? info@loftchart.com