TaylorMade MG4 vs TaylorMade MG5 Wedges

Side-by-side factory option matrices. Lofts where the two lines offer a different number of options are highlighted.

Options at each loft

Bounce and grind options at each loft: MG4 vs MG5.
Loft MG4 bounce / grind # MG5 bounce / grind #
46°9° SB19° SB1
48°9° SB19° SB1
50°9° SB19° SB1
52°9° SB19° SB1
54°11° SB, 13° HB210° SC, 12° SB, 13° HB3
56°8° LB, 12° SB, 12° TW, 14° HB48° LB, 10° SC, 12° SB, 12° TW, 14° HB5
58°7° LBV, 8° LB, 9° SBC, 11° SB, 12° HB, 13° HBW68° LB, 9° SC, 10° SB, 11° SX, 12° HB5
60°7° LBV, 8° LB, 9° SBC, 10° SB, 11° TW, 12° HB, 13° HBW78° LB, 9° SC, 10° SB, 11° SX, 11° TW, 12° HB6

Each cell lists the bounce/grind combinations sold at that loft, factory standard. Highlighted counts differ between the two lines.

Options per loft

  • MG4
  • MG5
MG4 and MG5 options per loftColumn chart of the number of bounce and grind options per loft for the MG4 and the MG5. 46 degrees: 1 and 1. 48 degrees: 1 and 1. 50 degrees: 1 and 1. 52 degrees: 1 and 1. 54 degrees: 2 and 3. 56 degrees: 4 and 5. 58 degrees: 6 and 5. 60 degrees: 7 and 6.024646MG4 at 46°: 1 optionMG5 at 46°: 1 option48MG4 at 48°: 1 optionMG5 at 48°: 1 option50MG4 at 50°: 1 optionMG5 at 50°: 1 option52MG4 at 52°: 1 optionMG5 at 52°: 1 option54MG4 at 54°: 2 optionsMG5 at 54°: 3 options56MG4 at 56°: 4 optionsMG5 at 56°: 5 options58MG4 at 58°: 6 optionsMG5 at 58°: 5 options60MG4 at 60°: 7 optionsMG5 at 60°: 6 optionsOptionsLoft
Bounce/grind options offered at each loft: 23 options in all for the MG4, 23 for the MG5. A missing column means the model is not sold at that degree.

What the differences mean

Both models offer 23 loft/bounce/grind combinations, so neither wins on raw selection. The MG4 also has the deeper grind catalogue: 7 sole grinds against 6.

Loft coverage is identical: both run 46° to 60° and are sold at the same 8 degrees.

The scoring lofts are where bounce and grind choice matters most: at 56° the MG5 offers 5 options to 4; at 58° the MG4 offers 6 options to 5; at 60° the MG4 offers 7 options to 6. More options at a degree means more ways to match the sole to your turf and swing, which is what a wedge fitting actually selects.

The MG5 arrived 2 years after the MG4 as its replacement. Wedge generations usually carry over the core loft ladder and adjust the grind catalogue, groove spec and finishes, so the older model is the value buy while stock lasts — the trade-off is the newer grooves, which matter more the more you play.

Which should you choose?

The MG5 is the newer generation, so it carries the current groove spec and the fuller retail availability; the MG4 is the value buy while closeout and used stock lasts. The option chart above is the tiebreaker — if the exact loft, bounce and grind you play is only in one of them, that decides it.

Both option charts are reproduced in full on their own pages: TaylorMade MG4 specs and TaylorMade MG5 specs.

Frequently asked questions

Which offers more options, the TaylorMade MG4 or the MG5?

Both offer 23 loft, bounce and grind combinations.

What lofts do the TaylorMade MG4 and MG5 come in?

The TaylorMade MG4 is sold from 46 to 60 degrees and the MG5 from 46 to 60 degrees. They share 8 lofts.

Which has more 56 degree options, the TaylorMade MG4 or the MG5?

The MG5: 5 bounce/grind options at 56 degrees against 4.

Shop TaylorMade MG4

Compare prices for new and used sets on eBay:

We may earn a commission from purchases made through links on this page at no extra cost to you.