TaylorMade P7MC vs TaylorMade P7CB
Side-by-side factory specifications. Differing values are highlighted.
Specification comparison
| Club | P7MC loft | P7CB loft | P7MC lie | P7CB lie | P7MC length | P7CB length |
|---|---|---|---|---|---|---|
| 3 | 20 | 20 | 60.5 | 60.5 | 39 | 39 |
| 4 | 23 | 23 | 61 | 61 | 38.5 | 38.5 |
| 5 | 26 | 26 | 61.5 | 61.5 | 38 | 38 |
| 6 | 30 | 29 | 62 | 62 | 37.5 | 37.5 |
| 7 | 34 | 33 | 62.5 | 62.5 | 37 | 37 |
| 8 | 38 | 37 | 63 | 63 | 36.5 | 36.5 |
| 9 | 42.5 | 41 | 63.5 | 63.5 | 36 | 36 |
| PW | 47 | 46 | 64 | 64 | 35.75 | 35.75 |
| GW | — | 51 | — | 64 | — | 35.5 |
Highlighted cells differ between the two sets. Lofts and lies are factory standard.
Lofts compared
- P7MC
- P7CB
What the differences mean
At the 7-iron, the P7MC is 34° and the P7CB is 33°, a 1° gap. Each degree of loft is worth roughly 3 to 4 yards of carry at the same swing speed, so the P7CB should carry roughly 3 to 4 yards further with that club, on a slightly lower, shallower flight than the P7MC. Across the 8 clubs both sets share, the P7CB averages 0.7° stronger, with the largest gap at the 9-iron (42.5° vs 41°). The pitching wedges are 47° and 46°; the stronger one leaves a 4° jump to a 50° gap wedge, which matters when planning wedge gapping.
The sets are built differently: the P7MC runs 3-iron to PW (8 clubs), the P7CB 3-iron to GW (9 clubs).
Both are players irons, built for roughly scratch to 10 handicaps. Small-to-mid cavity backs with traditional lofts, modest offset and workable shaping for low-handicap players. Because they target the same golfer, the decision comes down to the specific loft, feel and shaping differences rather than who the sets are made for.
The P7MC is listed as forged and the P7CB as forged with co-forged tungsten. The P7CB adds tungsten weighting, which lowers the centre of gravity and raises stability on mis-hits, helping the long irons launch.
There are 4 years between these sets (2020 and 2024), more than one design generation. Over that time irons moved toward stronger lofts, thinner and faster faces, hollow and multi-material heads and wider use of tungsten, so the newer set is not simply a better version of the older one: it may launch and spin quite differently. Here the 7-iron loft moved from 34° to 33°.
Which should you choose?
The P7CB is the stronger-lofted set — up to 1.5° stronger than the P7MC on matching clubs. Expect longer carry per numbered iron but a flatter descent angle; gapping at the wedge end is where that shows up.
Both charts are reproduced in full on their own pages: TaylorMade P7MC specs and TaylorMade P7CB specs.
Frequently asked questions
Is the TaylorMade P7MC stronger lofted than the P7CB?
No. The P7CB is the stronger-lofted set: its 7-iron is 33° against 34° for the TaylorMade P7MC, 1° stronger and worth roughly 3 to 4 yards of extra carry.
What is the loft difference between the TaylorMade P7MC and P7CB?
At the 7-iron the difference is 1° (34° vs 33°). The largest gap on a shared club is 1.5° at the 9-iron, and 5 of the 8 shared clubs differ.
Are the TaylorMade P7MC and P7CB aimed at the same golfer?
Yes. Both are players irons, built for roughly scratch to 10 handicaps. Choose on feel, looks and gapping, ideally after hitting both.
Do the TaylorMade P7MC and P7CB have the same lie and length?
At the 7-iron, yes: both are 62.5° lie and 37 inches long.
Shop both models
Compare prices for new and used sets on eBay:
We may earn a commission from purchases made through links on this page at no extra cost to you.