Titleist 695.MB vs Titleist 710 MB
Side-by-side factory specifications. Differing values are highlighted.
Specification comparison
| Club | 695.MB loft | 710 MB loft | 695.MB lie | 710 MB lie | 695.MB length | 710 MB length |
|---|---|---|---|---|---|---|
| 2 | 19 | — | 59 | — | 39.5 | — |
| 3 | 22 | 21 | 60 | 60 | 39 | 39 |
| 4 | 25 | 24 | 61 | 61 | 38.5 | 38.5 |
| 5 | 28 | 27 | 62 | 62 | 38 | 38 |
| 6 | 32 | 31 | 62.5 | 62.5 | 37.5 | 37.5 |
| 7 | 36 | 35 | 63 | 63 | 37 | 37 |
| 8 | 40 | 39 | 63.5 | 63.5 | 36.5 | 36.5 |
| 9 | 44 | 43 | 64 | 64 | 36 | 36 |
| PW | 48 | 47 | 64 | 64 | 35.75 | 35.75 |
Highlighted cells differ between the two sets. Lofts and lies are factory standard.
Lofts compared
- 695.MB
- 710 MB
What the differences mean
At the 7-iron, the 695.MB is 36° and the 710 MB is 35°, a 1° gap. Each degree of loft is worth roughly 3 to 4 yards of carry at the same swing speed, so the 710 MB should carry roughly 3 to 4 yards further with that club, on a slightly lower, shallower flight than the 695.MB. Across the 8 clubs both sets share, the 710 MB averages 1° stronger, with the largest gap at the 3-iron (22° vs 21°). The pitching wedges are 48° and 47°; the stronger one leaves a 3° jump to a 50° gap wedge, which matters when planning wedge gapping.
The sets are built differently: the 695.MB runs 2-iron to PW (9 clubs), the 710 MB 3-iron to PW (8 clubs).
Both are blade irons, built for low single-digit handicaps who strike the ball consistently. Compact muscleback irons with minimal offset, thin toplines and the smallest sweet spot — built for shot-shaping over forgiveness. Because they target the same golfer, the decision comes down to the specific loft, feel and shaping differences rather than who the sets are made for.
Both heads are listed as forged muscleback. With the build method this similar, differences in feel come down to head size, sole width, topline and offset rather than how the heads are made.
The 710 MB came out 3 years after the 695.MB, but it is a different line rather than a direct replacement, so the two were designed for different golfers as well as different seasons.
Which should you choose?
The 710 MB is the stronger-lofted set — up to 1° stronger than the 695.MB on matching clubs. Expect longer carry per numbered iron but a flatter descent angle; gapping at the wedge end is where that shows up.
Both charts are reproduced in full on their own pages: Titleist 695.MB specs and Titleist 710 MB specs.
Frequently asked questions
Is the Titleist 695.MB stronger lofted than the 710 MB?
No. The 710 MB is the stronger-lofted set: its 7-iron is 35° against 36° for the Titleist 695.MB, 1° stronger and worth roughly 3 to 4 yards of extra carry.
What is the loft difference between the Titleist 695.MB and 710 MB?
At the 7-iron the difference is 1° (36° vs 35°). The largest gap on a shared club is 1° at the 3-iron, and all 8 shared clubs differ.
Are the Titleist 695.MB and 710 MB aimed at the same golfer?
Yes. Both are blade irons, built for low single-digit handicaps who strike the ball consistently. Choose on feel, looks and gapping, ideally after hitting both.
Do the Titleist 695.MB and 710 MB have the same lie and length?
At the 7-iron, yes: both are 63° lie and 37 inches long.
Shop Titleist 695.MB
Compare prices for new and used sets on eBay:
We may earn a commission from purchases made through links on this page at no extra cost to you.