Titleist 710 MB Irons Specifications
Full factory loft, lie and length chart for the Titleist 710 MB irons, 2009–2011.
- Years produced
- 2009–2011
- Category
- Blade / Muscleback
- Construction
- forged muscleback
- Material
- forged 1025 carbon steel with satin chrome plating
- Set makeup
- 3–PW
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) | Bounce | Swing wt |
|---|---|---|---|---|---|---|
| 3 | 21 | 60 | 39 | 0.125 | 2 | D2 |
| 4 | 24 | 61 | 38.5 | 0.12 | 3 | D2 |
| 5 | 27 | 62 | 38 | 0.115 | 4 | D2 |
| 6 | 31 | 62.5 | 37.5 | 0.11 | 4.5 | D2 |
| 7 | 35 | 63 | 37 | 0.1 | 5 | D2 |
| 8 | 39 | 63.5 | 36.5 | 0.09 | 6 | D2 |
| 9 | 43 | 64 | 36 | 0.08 | 7 | D2 |
| PW | 47 | 64 | 35.75 | 0.075 | 8 | D2 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Titleist 710 MB
The 710 MB is the forged muscleback Titleist introduced in the autumn of 2009 for the 2010 season, alongside the 710 CB, AP1 and AP2. It is forged from 1025 carbon steel with a uniform muscle behind the face, constant blade length, a thin topline and minimal progressive offset running from .125 inches at the 3-iron to .075 inches at the pitching wedge. Against the 695.MB it replaced, the loft ladder moved one degree stronger from the 6-iron down: the 7-iron is 35 degrees against 36, and the pitching wedge is 47 degrees against 48. The stock set was a 3-iron through pitching wedge with no gap wedge.
Stock shafts
- True Temper Dynamic Gold — steel
Related models
- Predecessor: Titleist 695.MB
- Same-generation players iron: Titleist 710 AP2
- Compare: Titleist 710 MB vs Titleist 695.MB
- Compare: Titleist 710 MB vs Titleist 710 AP2
Frequently asked questions
What is the loft of a Titleist 710 MB 7-iron?
The Titleist 710 MB 7-iron is 35 degrees, with a 63 degree lie and a 37 inch standard steel length.
How do the 710 MB lofts compare with the 695.MB?
The long irons match, but the 710 MB is one degree stronger from the 6-iron down: a 35 degree 7-iron against 36 and a 47 degree pitching wedge against 48.
How much offset does the Titleist 710 MB have?
Very little. Titleist published .125 inches at the 3-iron tapering to .075 inches at the pitching wedge, against .160 to .085 inches on the 710 AP2 of the same generation.
Finding a used set
The Titleist 710 MB is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- Titleist previous-models archived product page, titleist.com/golf-clubs/irons/mb-710, via the Internet Archive (full manufacturer table headed 'MB': offset, bounce, loft, length, lie, swingweight)
- Titleist 710 MB product copy via titleist.com and the 2009 Titleist MB/CB press release as carried by TheGolfWire and AmateurGolf.com - forged 1025 carbon steel, satin chrome plating, constant blade length, minimal progressive offset, Dynamic Gold stock shaft
Last reviewed 2026-07-22. Spot an error? [email protected]