Titleist 710 CB Irons Specifications
Full factory loft, lie and length chart for the Titleist 710 CB irons, 2009–2011.
- Years produced
- 2009–2011
- Category
- Players Irons
- Construction
- forged cavity back
- Material
- forged 1025 carbon steel with bright chrome plating
- Set makeup
- 2–PW
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) | Bounce | Swing wt |
|---|---|---|---|---|---|---|
| 2 | 18 | 60 | 39.5 | 0.15 | 0 | D2 |
| 3 | 21 | 60 | 39 | 0.14 | 1 | D2 |
| 4 | 24 | 61 | 38.5 | 0.13 | 2 | D2 |
| 5 | 27 | 62 | 38 | 0.12 | 3 | D2 |
| 6 | 31 | 62.5 | 37.5 | 0.11 | 4 | D2 |
| 7 | 35 | 63 | 37 | 0.1 | 5 | D2 |
| 8 | 39 | 63.5 | 36.5 | 0.09 | 6 | D2 |
| 9 | 43 | 64 | 36 | 0.08 | 7 | D2 |
| PW | 47 | 64 | 35.75 | 0.075 | 8 | D2 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Titleist 710 CB
The 710 CB is the forged cavity back Titleist introduced in the autumn of 2009 for the 2010 season, alongside the 710 MB, AP1 and AP2. It is forged from 1025 carbon steel with a full cavity and an optimized inner cavity muscle behind the impact area, slightly longer constant blade lengths and a softer topline, giving more inertia and forgiveness than the MB while keeping a players profile. The specs carry over unchanged from the ZB it replaced - a 35 degree 7-iron, 47 degree pitching wedge and minimal progressive offset - with the stock set a 3-iron through pitching wedge and an 18 degree 2-iron available.
Stock shafts
- True Temper Dynamic Gold — steel
Related models
- Successor: Titleist 712 CB
- Predecessor: Titleist ZB
- Same-generation muscleback: Titleist 710 MB
- Same-generation players iron: Titleist 710 AP2
Frequently asked questions
What is the loft of a Titleist 710 CB 7-iron?
The Titleist 710 CB 7-iron is 35 degrees, with a 63 degree lie and a 37 inch standard steel length.
What is the difference between the Titleist 710 CB and 710 MB?
Lofts, lies and lengths are identical, but the CB is a full cavity back with more inertia and forgiveness, slightly longer blade lengths and marginally more offset (0.140 to 0.075 inches against 0.125 to 0.075), while the MB is a pure muscleback.
Did Titleist change the specs from the ZB to the 710 CB?
No. The 710 CB kept the ZB table unchanged: an 18 degree 2-iron, 35 degree 7-iron and 47 degree pitching wedge with the same offsets and bounce angles.
Finding a used set
The Titleist 710 CB ran from 2009 to 2011 and is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- Titleist previous-models archived product page, titleist.com/golf-clubs/irons/cb-710, via the Internet Archive, April 2017 capture (full manufacturer table headed 'CB': offset, bounce, loft, length, lie, swingweight, 2-iron through PW)
- Same archived page product copy - forged 1025 carbon steel, bright chrome plating, optimized cavity muscle, increased inertia versus MB, True Temper Dynamic Gold stock shaft with Titleist Tour Velvet grip
- Announced with the 710 series in the autumn of 2009 and sold as Titleist's 2010 line; the 712 CB announced in 2011 replaced it, per this database's other 71x-series entries
Last reviewed 2026-07-28. Spot an error? [email protected]