Titleist 712 CB Irons Specifications
Full factory loft, lie and length chart for the Titleist 712 CB irons, 2011–2013.
- Years produced
- 2011–2013
- Category
- Players Irons
- Construction
- forged with a co-forged tungsten weight in the long irons
- Material
- 1025 carbon steel with tungsten
- Set makeup
- 2–PW
Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) | Swing wt |
|---|---|---|---|---|---|
| 2 | 18 | 59 | 39.5 | 0.15 | D2 |
| 3 | 21 | 60 | 39 | 0.14 | D2 |
| 4 | 24 | 61 | 38.5 | 0.13 | D2 |
| 5 | 27 | 62 | 38 | 0.12 | D2 |
| 6 | 31 | 62.5 | 37.5 | 0.11 | D2 |
| 7 | 35 | 63 | 37 | 0.1 | D2 |
| 8 | 39 | 63.5 | 36.5 | 0.09 | D2 |
| 9 | 43 | 64 | 36 | 0.08 | D2 |
| PW | 47 | 64 | 35.75 | 0.075 | D2 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Titleist 712 CB
The 712 CB is the cavity back that sits alongside the 712 MB, forged from 1025 carbon steel with a high-density tungsten weight co-forged into the toe of the long irons. It shares the muscleback's loft, lie and length chart exactly from the 3-iron down and extends the set upward with an 18-degree 2-iron. Offset is marginally greater than the MB's, 0.140 inches at the 3-iron against 0.125. Figures are the men's standard right-handed steel build.
Stock shafts
- True Temper Dynamic Gold — steel · flexes: S300, X100
- Project X Flighted — steel
- Nippon N.S. Pro Modus 3 Tour 120 — steel
- FST KBS C-Taper 130 — steel
Related models
- Muscleback sibling: Titleist 712 MB
- Successor: Titleist 714 CB
- Earlier Titleist cavity back: Titleist 690.CB
- Players sibling: Titleist 712 AP2
- Compare: Titleist 712 CB vs Titleist 690.CB
Frequently asked questions
What is the loft of a Titleist 712 CB 7-iron?
The Titleist 712 CB 7-iron has a loft of 35 degrees, a lie of 63.0 degrees and a steel-shaft length of 37.00 inches.
When were Titleist 712 CB irons made?
The 712 generation was introduced in 2011 and replaced by the 714 line in 2013.
Does the Titleist 712 CB come in a 2-iron?
Yes. The CB set extends to an 18-degree 2-iron at 39.50 inches, which the 712 MB does not offer.
How much more offset does the 712 CB have than the 712 MB?
About 0.015 inches in the long irons — 0.140 against 0.125 at the 3-iron — converging to identical figures from the 6-iron down.
Finding a used set
The Titleist 712 CB ran from 2011 to 2013 and is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- 2ndswing.com Titleist 712 CB Iron Set specification table — loft, lie, length, offset and swing weight for the 2-iron through pitching wedge, plus the 3-PW and 4-PW set ranges and the shaft options.
- Note: bounce was not published in the source consulted and is omitted rather than estimated.
Last reviewed 2026-07-28. Spot an error? [email protected]