Honma TW767 Px Irons Specifications
Full factory loft, lie and length chart for the Honma TW767 Px irons, 2024–present.
- Years produced
- 2024–present
- Category
- Players Distance Irons
- Construction
- multi-piece forged body with a cap-back and L-cup face insert
- Material
- S25C forged soft iron body with an AM355P face (4 to 8) and an ES235 face (9 to A)
- Set makeup
- 5–A
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) |
|---|---|---|---|---|
| 5 | 24 | 60.5 | 38 | 0.138 |
| 6 | 27 | 61 | 37.5 | 0.118 |
| 7 | 30 | 61.5 | 37 | 0.118 |
| 8 | 34 | 62 | 36.5 | 0.118 |
| 9 | 38 | 62.5 | 36 | 0.098 |
| P | 43 | 63 | 35.5 | 0.098 |
| A | 49 | 63 | 35.5 | 0.098 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Honma TW767 Px
The Px is the players-distance iron of Honma's T//World 767 range and Honma's first "Cap-Back" construction and first three-piece iron in the TW series, combining a forged S25C body with a variable-thickness L-cup face on the 5 to 8 irons for extra ball speed on off-centre strikes. It replaces the TW757 P in Honma's lineup: lofts run about a degree stronger through the middle of the set than the TW757 P (30 degrees at the 7-iron versus 28.5) on a similar lie progression, and the set now extends to a 49-degree A-wedge.
Stock shafts
- Nippon N.S.Pro 950GH neo — steel
- Nippon N.S.Pro Modus3 Tour 115 — steel · flexes: S
- Honma VIZARD EZ-C — graphite
- Honma VIZARD EZ-IB — graphite
Related models
- Predecessor: Honma TW757 P
- Same generation, players cavity-back head: Honma TW767 Vx
- Same generation, game-improvement head: Honma TW767 Hx
- Compare: Honma TW767 Px vs Honma TW757 P
- Compare: Honma TW767 Px vs Honma TW767 Hx
- Compare: Honma TW767 Px vs Honma TW767 Tour V
- Compare: Honma TW767 Px vs Honma TW777 PCB Max
Frequently asked questions
What is the loft of a Honma TW767 Px 7-iron?
The Honma TW767 Px 7-iron has a loft of 30 degrees, a lie of 61.5 degrees and a length of 37.0 inches in the steel-shaft build.
What is the difference between the Honma TW757 P and TW767 Px?
The TW767 Px runs about a degree stronger through the middle irons (30 degrees at the 7-iron versus 28.5 on the TW757 P) and switches to Honma's first Cap-Back, three-piece forged construction with an L-Cup face on the 5 to 8 irons, where the TW757 P was a cast hollow body.
When were the Honma TW767 Px irons released?
Honma announced the T//World TW767 collection on 22 October 2024, with the Px going on sale in the US market around October 2024.
Where it sits in the lineup
Introduced in 2024, the Honma TW767 Px is a current players distance set in the Honma range, with no replacement announced. It replaced the Honma TW757 P. New sets are built to the standard lofts, lies and lengths in the chart above, though a fitting can move any of them — so confirm the numbers on the order sheet. Used sets appear on eBay, 2nd Swing and Golf Avenue, and should be measured against this chart before buying.
- Honma's own T//World Px product page, specification table (honmagolf.com) — supplied every loft, lie, length and offset above, the exact construction text ('Soft Iron(S25C)/Forged + AM355P Face/Casting' for #5-#8 and 'Soft Iron(S25C)/Forged + ES235 Face/Casting' for #9-A), and the four stock shaft options.
- Note on offset: Honma publishes offset in millimetres (3.5 mm for the 5 iron, 3.0 mm for the 6 to 8 irons, 2.5 mm for the 9, P and A) and is converted to inches here.
- Note on length: Honma's chart lists two length columns depending on stock shaft; the figures above are the N.S.Pro 950GH neo (steel) column, matching this schema's steel-shaft-standard convention. Graphite-shaft (VIZARD EZ-C) lengths run 0.25 inch longer at each club.
- pluggedingolf.com 'Honma TW767 Px Irons Review' — corroborates the S25C forged body with an L-Cup face on the 5-8 irons, a flat ES235 face on 9-AW, the first Cap-Back design in the TW range, and an October 2024 release.
- firstcallgolf.com 'Honma Golf Launches Tour World 767 Collection' (release dated 22 October 2024) — announcement date, used for year_introduced.
- Note: year_discontinued is null — no successor to the TW767 Px had been announced in the sources retrieved. Honma's current T//World 2026 (TW777) marketing material continues to list a 'Px' head, but no distinct TW777-generation spec sheet for it could be found, and the TW767 Px's own US product page still references the TW767 product manual — see the TW777 PCB Max file for the one iron confirmed as genuinely new for that generation.
Last reviewed 2026-08-30. Spot an error? info@loftchart.com