Miura PP-9003 Irons Specifications
Full factory loft, lie and length chart for the Miura PP-9003 irons, 2011–2019.
- Years produced
- 2011–2019
- Category
- Players Distance Irons
- Construction
- forged cavity back with wide sole
- Material
- soft carbon steel, forged in Himeji, Japan
- Set makeup
- 4–GW
Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) | Bounce |
|---|---|---|---|---|---|
| 4 | 22 | 60 | 38.5 | 0.22 | 2 |
| 5 | 25 | 60.5 | 38 | 0.213 | 3 |
| 6 | 28 | 61 | 37.5 | 0.201 | 4 |
| 7 | 32 | 61.5 | 37 | 0.169 | 6 |
| 8 | 36 | 62 | 36.5 | 0.169 | 7 |
| 9 | 40 | 62.5 | 36 | 0.169 | 9 |
| PW | 45 | 63 | 35.75 | 0.161 | 11 |
| GW | 50 | 63.5 | 35.5 | 0.138 | 13 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
Shop Miura PP-9003
Compare prices for new and used sets on eBay:
We may earn a commission from purchases made through links on this page at no extra cost to you.
Loft progression
About the Miura PP-9003
The Passing Point 9003 was Miura's invitation to golfers who wanted the Himeji forged feel without a tour player's precision — the friendliest iron the family workshop made. Designed by the Miura sons Shinei and Yoshitaka and introduced worldwide on 1 April 2011, it is a forged cavity back with perimeter weighting, a wider sole shaped to glide through turf, generous offset that flows into the head, and a low centre of gravity for a high, soft-landing flight. Lofts are traditional — a 32-degree 7-iron and 45-degree pitching wedge across a 4-GW factory chart. A Straight Neck (PP-9003 SN) variant followed with the same lofts and lies but roughly a third less offset, for players who did not want the trajectory help. The PP-9003 remained in Miura's range through the brand's 2017 change of ownership and left the line around the 2019 relaunch of the lineup, with no direct successor named. Miura sold heads through dealers and fitters, so the lengths below are Miura's standard assembly lengths of the era rather than a factory sheet; specs are for the regular (offset) model.
Related models
Frequently asked questions
What is the loft of a Miura PP-9003 7-iron?
The Miura PP-9003 7-iron has a loft of 32 degrees and a lie of 61.5 degrees, with about 4.3 mm of offset and a standard-build length of 37 inches.
What does Passing Point mean on the Miura PP-9003?
It is the Miura family's name for the moments a golfer passes from one stage to the next — the PP-9003 was designed as the 'friendly' Miura, a forged cavity back with a wider sole and real offset for golfers still improving.
What is the Miura PP-9003 Straight Neck?
A variant with the same lofts, lies and weights but roughly a third less offset (3.8 mm at the 4-iron against the regular model's 5.6), for players who liked the head but not the trajectory help.
When was the Miura PP-9003 made?
It was introduced worldwide on 1 April 2011 and stayed in the range until around 2019, when Miura's relaunched lineup dropped it without a named successor.
Finding a used set
The Miura PP-9003 ran from 2011 to 2019 and is no longer in production, so the used market is the only source. Search the used listings on eBay, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- Miura Golf official Passing Point specification page (miuragolf.com/passingpoint-PP9003straightneck.asp, archive.org capture of 17 April 2014) — the factory chart for both the 9003 REG and 9003 SN: 4-GW lofts 22/25/28/32/36/40/45/50, lies 60.0-63.5, head weights 250-296 g, face progression, offset in mm (REG: 5.6/5.4/5.1/4.3/4.3/4.3/4.1/3.5, converted to inches here) and bounce 2-13 degrees, plus the Passing Point design philosophy copy.
- The Golf Wire / golfshake.com 'Miura Golf Introduces Passing Point 9003 (PP-9003) Forged Cavity-Back Irons' — the worldwide introduction set for 1 April 2011, the 4-PW-plus-GW right-hand range, and the wide-sole, low-CG, high-soft-flight design brief.
- GolfWRX 'Review: Miura PP-9003 Straight Neck Irons' — the reduced-offset SN variant and its positioning for players who want less trajectory help.
- Lengths are Miura's standard men's steel assembly lengths of the era (38.5-inch 4-iron through 35.5-inch GW), as recorded for other head-only Miura models of the period; Miura published no lengths, so confidence is medium. year_discontinued 2019 reflects the model's absence from the relaunched miuragolf.com range that year; the old product pages survive only in web archives.
Last updated 29 July 2026. Spot an error? info@loftchart.com