Mizuno JPX-800 Pro Irons Specifications
Full factory loft, lie and length chart for the Mizuno JPX-800 Pro irons, 2010–2012.
- Years produced
- 2010–2012
- Category
- Players Irons
- Construction
- Grain Flow Forged with an undercut cavity
- Material
- 1025E Pure Select mild carbon steel
- Set makeup
- 3–GW
Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) | Bounce |
|---|---|---|---|---|---|
| 3 | 20 | 59.5 | 38.75 | 0.171 | 1 |
| 4 | 23 | 60 | 38.25 | 0.161 | 2 |
| 5 | 26 | 60.5 | 37.75 | 0.154 | 2 |
| 6 | 29 | 61 | 37.25 | 0.146 | 2 |
| 7 | 33 | 61.5 | 36.75 | 0.134 | 3 |
| 8 | 37 | 62 | 36.25 | 0.122 | 4 |
| 9 | 41 | 62.5 | 35.75 | 0.11 | 5 |
| PW | 45 | 63 | 35.5 | 0.102 | 6 |
| GW | 50 | 63 | 35.25 | 0.102 | 7 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Mizuno JPX-800 Pro
The JPX-800 Pro is the forged, compact partner to the cast JPX-800 in the first JPX generation, unveiled in autumn 2010 and a 2011 Golf Digest Hot List gold medalist. It is Grain Flow Forged from 1025E carbon steel with an undercut cavity that thins the face for speed, and a Triple Cut sole. Lofts sit between the MX line it replaced and the distance-first JPX-800 — 33 degrees at the 7-iron and 45 at the pitching wedge — with a moderate offset ladder from 0.171 inches at the 3-iron. The catalogued range is 3-iron through a 50-degree gap wedge. Figures are the men's standard steel build.
Stock shafts
- True Temper Dynamic Gold XP — steel
Related models
- Cast distance model of the same generation: Mizuno JPX-800
- Successor: Mizuno JPX-825 Pro
- Forged predecessor line: Mizuno MX-300
- Compare: Mizuno JPX-800 Pro vs Mizuno JPX-800
Frequently asked questions
What is the loft of a Mizuno JPX-800 Pro 7-iron?
The Mizuno JPX-800 Pro 7-iron has a loft of 33 degrees, with a 61.5-degree lie and a 36.75-inch steel-shaft length.
What is the difference between the JPX-800 and the JPX-800 Pro?
The JPX-800 is a cast, strong-lofted distance iron with a 32-degree 7-iron and heavy offset, while the JPX-800 Pro is Grain Flow Forged from carbon steel with a 33-degree 7-iron, a smaller head and much less offset — 0.171 inches at the 3-iron against 0.209 at the JPX-800's 4-iron.
Are the Mizuno JPX-800 Pro irons forged?
Yes. They are Grain Flow Forged from 1025E Pure Select mild carbon steel, with an undercut cavity that thins the face for extra ball speed.
Finding a used set
The Mizuno JPX-800 Pro ran from 2010 to 2012 and is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- golfclubspec.com iron specification database, entry 264 (Mizuno JPX-800 PRO): loft, lie, length, offset, bounce, stock shaft Dynamic Gold XP
- 2ndswing.com Mizuno JPX 800 Pro Iron Set specification table (independently corroborates loft/lie/length, 3-PW; notes the 2011 Golf Digest Hot List gold star)
- year_introduced 2010 is the announcement year — the JPX-800 family was unveiled in autumn 2010 with US retail in 2011; year_discontinued 2012 is the announcement of the JPX-825 Pro that replaced it (mizunogolf.com irons timeline lists the model's US retail years as 2012-2013)
Last reviewed 2026-07-28. Spot an error? [email protected]