Mizuno MP-63 Irons Specifications
Full factory loft, lie and length chart for the Mizuno MP-63 irons, 2010–2011.
- Years produced
- 2010–2011
- Category
- Players Irons
- Construction
- forged
- Material
- 1025E Pure Select mild carbon steel
- Set makeup
- 3–PW
Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) | Bounce |
|---|---|---|---|---|---|
| 3 | 21 | 59.5 | 38.75 | 0.122 | 2 |
| 4 | 24 | 60 | 38.25 | 0.122 | 2 |
| 5 | 27 | 60.5 | 37.75 | 0.122 | 2 |
| 6 | 30 | 61 | 37.25 | 0.114 | 3 |
| 7 | 34 | 61.5 | 36.75 | 0.114 | 3 |
| 8 | 38 | 62 | 36.25 | 0.11 | 4 |
| 9 | 42 | 62.5 | 35.75 | 0.106 | 5 |
| PW | 46 | 63 | 35.5 | 0.102 | 6 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Mizuno MP-63
The MP-63 is a Grain Flow Forged players cavity back and the smaller, lower-offset half of the pair Mizuno released with the MP-53. It shares that model's lofts, lies and lengths exactly but is built on a more compact head with offset of 0.122 inches or less through the set. The 7-iron is 34 degrees and the pitching wedge 46 degrees, and the stock set was 3-PW with True Temper Dynamic Gold shafts. Lengths and lofts listed are the standard men's steel-shaft specification.
Stock shafts
- True Temper Dynamic Gold S300 — steel
Related models
- Sibling model launched the same day: Mizuno MP-53
- Earlier MP cavity back: Mizuno MP-58
- Compare: Mizuno MP-63 vs Mizuno MP-53
- Compare: Mizuno MP-63 vs Mizuno MP-58
- Compare: Mizuno MP-63 vs Mizuno MP-62
Frequently asked questions
What is the loft of a Mizuno MP-63 7-iron?
The Mizuno MP-63 7-iron has a loft of 34 degrees, with a 61.5-degree lie and a 36.75-inch steel-shaft length.
How much offset do the Mizuno MP-63 irons have?
Very little. Offset runs from 0.122 inches at the 3-iron down to 0.102 inches at the pitching wedge, close to Mizuno's MP-68 blade of the same period.
What is the difference between the MP-63 and the MP-53?
The lofts, lies and lengths are identical. The MP-63 is the more compact head with less offset, while the MP-53 is larger and carries roughly 0.02 inches more offset through the long irons.
Finding a used set
The Mizuno MP-63 is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- Note: the MP-63 was revealed on 8 September 2010 alongside the MP-53 and was available from 13 October 2010. Golf Monthly's reveal describes it as an evolution of the MP-62, which is recorded as its predecessor; the field previously named the MP-53, a same-day sibling. The successor field previously named the MP-58, which in fact preceded it, and is now left unset.
- golfclubspec.com iron specification database, Mizuno MP-63 entry (loft, lie, length, offset, bounce for 3-PW plus the Dynamic Gold S300 stock shaft)
- TheSandTrap.com Mizuno MP-63 irons review, corroborating the loft, lie, length and bounce table and the True Temper Dynamic Gold stock shaft
- Note: golfclubspec dates its MP-63 entry to the 2011 catalogue; the introduction year recorded here follows the MP players cavity-back chronology used across this site.
- Note: year_discontinued is taken as the year the successor model was introduced.
Last reviewed 2026-07-22. Spot an error? [email protected]