Mizuno MP-68 Irons Specifications
Full factory loft, lie and length chart for the Mizuno MP-68 irons, 2009–2011.
- Years produced
- 2009–2011
- Category
- Blade / Muscleback
- Construction
- forged
- Material
- 1025E mild carbon steel
- Set makeup
- 3–PW
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) | Bounce |
|---|---|---|---|---|---|
| 3 | 21 | 59.5 | 38.75 | 0.11 | 2 |
| 4 | 24 | 60 | 38.25 | 0.11 | 2 |
| 5 | 27 | 60.5 | 37.75 | 0.11 | 2 |
| 6 | 31 | 61 | 37.25 | 0.11 | 3 |
| 7 | 35 | 61.5 | 36.75 | 0.11 | 3 |
| 8 | 39 | 62 | 36.25 | 0.102 | 4 |
| 9 | 43 | 62.5 | 35.75 | 0.102 | 5 |
| PW | 47 | 63 | 35.5 | 0.094 | 6 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Mizuno MP-68
The MP-68 is a Grain Flow Forged muscle-back blade with a scalloped muscle pad and a shortened hosel, sold in a 3-iron through pitching wedge range. It runs one degree stronger than the MP-67 it replaced, with a 35-degree 7-iron and a 47-degree pitching wedge, and carries very little offset: 0.110 inches through the 7-iron, tapering to 0.094 inches at the pitching wedge. Bounce climbs from 2 degrees in the long irons to 6 degrees at the wedge. Lengths and lofts listed are the standard men's steel-shaft specification.
Stock shafts
- True Temper Dynamic Gold — steel · flexes: R300, S300
- Project X — steel · flexes: 5.5
Related models
- Predecessor: Mizuno MP-67
- Successor: Mizuno MP-69
- Compare: Mizuno MP-68 vs Mizuno MP-67
- Compare: Mizuno MP-68 vs Mizuno MP-69
Frequently asked questions
What is the loft of a Mizuno MP-68 7-iron?
The Mizuno MP-68 7-iron has a loft of 35 degrees, with a 61.5-degree lie and a 36.75-inch steel-shaft length.
How much offset do the Mizuno MP-68 irons have?
Very little. Offset is 0.110 inches from the 3-iron through the 7-iron, 0.102 inches in the 8-iron and 9-iron, and 0.094 inches at the pitching wedge.
What is the pitching wedge loft on the Mizuno MP-68?
The MP-68 pitching wedge is 47 degrees, with a 63-degree lie, 6 degrees of bounce and a 35.5-inch steel-shaft length.
Finding a used set
The Mizuno MP-68 is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- golfclubspec.com iron spec database, Mizuno MP-68 entry id=268 (full loft/lie/length/offset/bounce table; notes stock shafts as True Temper Dynamic Gold R300, S300 and Project X 5.5)
- mizunoforum.com thread 'mp-68 specs' reproducing the Mizuno USA MP-68 spec sheet (identical loft, lie, offset, bounce and length figures; also gives European swing weights of D1-D3, which are ranges rather than a single stock value and so are omitted)
- mizunogolf.com US irons timeline (production years 2010-2011) and Mizuno MP-68 product copy describing the head as forged from a single 1025E Pure Select mild carbon steel billet
- Note: the MP-68 was introduced on 4 September 2009 alongside the MP-58, and TheSandTrap's 29 September 2009 launch piece says 'You should be able to find them in stores now'. This file previously recorded 2010, which contradicted the MP-58 entry the MP-68 was launched with. Corrected to 2009.
Last reviewed 2026-07-22. Spot an error? [email protected]