Mizuno MP-69 Irons Specifications
Full factory loft, lie and length chart for the Mizuno MP-69 irons, 2011–2013.
- Years produced
- 2011–2013
- Category
- Blade / Muscleback
- Construction
- forged
- Material
- 1025E Pure Select mild carbon steel
- Set makeup
- 3–PW
Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.
Loft, lie & length chart
| Club | Loft (°) | Lie (°) | Length (in) | Offset (in) | Bounce |
|---|---|---|---|---|---|
| 3 | 21 | 59.5 | 38.75 | 0.11 | 2 |
| 4 | 24 | 60 | 38.25 | 0.11 | 2 |
| 5 | 27 | 60.5 | 37.75 | 0.11 | 2 |
| 6 | 30 | 61 | 37.25 | 0.11 | 3 |
| 7 | 34 | 61.5 | 36.75 | 0.11 | 3 |
| 8 | 38 | 62 | 36.25 | 0.102 | 4 |
| 9 | 42 | 62.5 | 35.75 | 0.102 | 5 |
| PW | 46 | 63 | 35.5 | 0.094 | 6 |
Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.
About the Mizuno MP-69
The MP-69 is a one-piece muscle-back blade Grain Flow Forged from a single billet of 1025E Pure Select mild carbon steel at Mizuno's Hiroshima plant. It replaced the MP-68 and introduced Mizuno's 4D Muscle design, which shifts muscle-pad mass progressively through the set rather than holding one profile across every head. Lofts are a degree stronger than the MP-68 from the 6-iron down, giving a 34-degree 7-iron, and offset is minimal at 0.110 inches through the long and mid irons. Lengths and lofts listed are the standard men's steel-shaft specification.
Stock shafts
- True Temper Dynamic Gold S300 — steel
Related models
Frequently asked questions
What is the loft of a Mizuno MP-69 7-iron?
The Mizuno MP-69 7-iron has a loft of 34 degrees, with a 61.5-degree lie and a 36.75-inch steel-shaft length.
How do the MP-69 lofts compare with the MP-68?
They match through the 5-iron at 21, 24 and 27 degrees, but the MP-69 is one degree stronger from the 6-iron down: a 34-degree 7-iron and a 46-degree pitching wedge against 35 and 47 degrees on the MP-68.
Are the Mizuno MP-69 irons forged?
Yes. Each head is Grain Flow Forged from a single billet of 1025E Pure Select mild carbon steel.
Finding a used set
The Mizuno MP-69 ran from 2011 to 2013 and is no longer in production, so the used market is the only source. Search eBay, 2nd Swing, Golf Avenue and the PGA Tour Superstore trade-in listings, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.
- 2ndswing.com Mizuno MP-69 iron set specification table (loft, lie, length, offset, bounce for 3-PW)
- InTheHoleGolf.com Mizuno MP-69 iron set product page, reproducing Mizuno's loft/lie/length chart, 3-PW stock makeup, 1025E Pure Select billet forging and double nickel mirror chrome finish
- Note: the published MP-69 offset and bounce figures are identical to Mizuno's MP-68 chart; the two blades share the same offset and sole specification, so the values could not be independently separated from the MP-68 data.
- Note: year_discontinued is taken as the year the successor model was introduced.
Last reviewed 2026-09-05. Spot an error? info@loftchart.com