Mizuno MX-23 Irons Specifications

Full factory loft, lie and length chart for the Mizuno MX-23 irons, 2006–2008.

Check Mizuno MX-23 prices on eBay Affiliate link — we may earn a commission at no extra cost to you.
Years produced
2006–2008
Category
Game Improvement Irons
Construction
investment cast with a cut muscle cavity
Material
stainless steel
Set makeup
3–PW

Data confidence: medium. These figures are compiled from secondary sources rather than a manufacturer spec sheet. If you have an original catalogue page, send it over and we will update the chart.

Loft, lie & length chart

Standard men's steel-shaft specifications for the Mizuno MX-23 irons.
ClubLoft (°)Lie (°)Length (in)Offset (in)Bounce
32059.538.750.242
4236038.250.222
52660.537.750.2013
6296137.250.1813
73361.536.750.1614
8376236.250.1615
94162.535.750.156
PW466335.250.156

Lofts and lies are the factory standard build. Individual clubs may differ if they have been bent, re-shafted or re-gripped during their life.

Shop Mizuno MX-23

Compare prices for new and used sets on eBay:

We may earn a commission from purchases made through links on this page at no extra cost to you.

Loft progression

Mizuno MX-23 loft by clubColumn chart of loft in degrees for each club in the set: 3 20, 4 23, 5 26, 6 29, 7 33, 8 37, 9 41, PW 46.0°10°20°30°40°50°3: 20°20°3+34: 23°23°4+35: 26°26°5+36: 29°29°6+47: 33°33°7+48: 37°37°8+49: 41°41°9+5PW: 46°46°PWClubGapLoft
Loft for each club, 3 to PW. The Gap row is the loft added from one club to the next; gaps run from 3° to 5°.
Mizuno MX-23 7-iron loft angleSide view of the club face tilted 33 degrees back from vertical, the loft of the 7-iron.33°VerticalFaceTarget
The 7-iron face, drawn at its 33° loft from the chart. Head shape is schematic, not to scale.

About the Mizuno MX-23

The MX-23 sits a step below the MX-17 in head size and a step above the MP line in forgiveness, with a cut-muscle cavity and a mid-width sole. Lofts run one degree stronger than the MX-17 through the mid irons — 33 degrees at the 7-iron against 34 — and the set finishes with a short 35.25-inch pitching wedge. Offset is heavy in the long irons at 0.240 inches and flattens out at 0.150 from the 9-iron down. Figures are the men's standard steel build.

Related models

Frequently asked questions

What is the loft of a Mizuno MX-23 7-iron?

The Mizuno MX-23 7-iron has a loft of 33 degrees, a lie of 61.5 degrees and a length of 36.75 inches.

When were Mizuno MX-23 irons made?

The MX-23 dates from 2006, alongside the larger MX-17 in Mizuno's MX game-improvement range.

What is the difference between the Mizuno MX-17 and MX-23?

The MX-23 is the smaller head with a cut-muscle cavity and lofts a degree stronger through the mid irons; the MX-17 has the wider sole, more offset and the deeper pocket cavity.

What is the pitching wedge loft on the Mizuno MX-23?

46 degrees, built at 35.25 inches — a quarter inch shorter than most Mizuno pitching wedges of the period.

Finding a used set

The Mizuno MX-23 ran from 2006 to 2008 and is no longer in production, so the used market is the only source. Search the used listings on eBay, and check the loft and lie against the chart above before buying — sets this age have often been bent from standard.

Data compiled from:
  • golfclubspec.com Mizuno MX-23 entry (iron_results.php?id=200), dated 2006 — loft, lie, length, offset and bounce for the 3-iron through pitching wedge, and the note that the model was sold in both right and left hand. The site states its figures are compiled from product brochures, magazines and enquiries to the manufacturers.
  • Note: swing weight and stock shafts were not published in the source consulted and are omitted rather than estimated.

Last updated 28 July 2026. Spot an error? info@loftchart.com